首页> 外文OA文献 >Influence of the Cut Axial Depth on Surface Roughness at High-Speed Milling of Thin-Walled Workpieces

【2h】

Influence of the Cut Axial Depth on Surface Roughness at High-Speed Milling of Thin-Walled Workpieces

机译：切割轴向深度对薄壁工件高速铣削表面粗糙度的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
A. I. Germashev; V. A. Logominov; S. I. Dyadya; Y. V. Kozlova; V. A. Krishtal;
展开▼
作者单位

展开▼
年度 2021
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effect of Workpiece Curvature on Axial Surface Error Profile in Flat End-Milling of Thin-walled Components [J] . Ankit Agarwal, K.A. Desai Procedia Manufacturing . 2020,第186期

机译：工件曲率对薄壁部件扁平端铣刀轴向误差曲线的影响
2. Experimental study on the chip morphology, tool-chip contact length, workpiece vibration, and surface roughness during high-speed face milling of A6061 aluminum alloy [J] . Thi-Hoa Pham, Duc-Toan Nguyen, Tien-Long Banh, Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture . 2020,第3期

机译：A6061铝合金高速面研磨过程中芯片形态，工具芯片接触长度，工件振动和表面粗糙度的实验研究
3. Influencing Factor Analysis of Workpiece Surface Roughness and Measuring System Design for the Main Factors in High-Speed Machining [J] . Qiyong Zeng, Kai Wu, Xiaofeng Zheng, International Journal of Manufacturing Science and Technology . 2012,第2期

机译：工件表面粗糙度的影响因素分析及高速加工主要因素的测量系统设计
4. Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine [C] . MOHD ZAIRULNIZAM Zawawi, MOHD ALI HANAFIAH Shaharudin, AHMAD ROSLI Abdul Manaf International Manufacturing Engineering Conference . 2014

机译：饲料速率和切割深度变化与刀具磨损率和表面粗糙度的影响：非高速铣床高速加工技术
5. Turning applications: The relationship between the workpiece extension length/diameter ratio and surface roughness. [D] . Cooper, John J., Jr. 2006

机译：车削应用：工件延伸长度/直径比与表面粗糙度之间的关系。
6. Real-Time Deflection Monitoring for Milling of a Thin-Walled Workpiece by Using PVDF Thin-Film Sensors with a Cantilevered Beam as a Case Study [O] . Ming Luo, Dongsheng Liu, Huan Luo 2016

机译：以带有悬臂梁的PVDF薄膜传感器为例对薄壁工件的铣削进行实时变形监控
7. The influence of Depth of Cut, Feed Rate, and Step-over on Surface Roughness of Polycarbonate Material in Subtractive Rapid Prototyping [O] . The, Jaya Suteja 2016

机译：减法快速成型中切削深度，进给速度和步进对聚碳酸酯材料表面粗糙度的影响

Influence of the Cut Axial Depth on Surface Roughness at High-Speed Milling of Thin-Walled Workpieces

著录项

引文网络

相似文献

相关主题

期刊订阅