首页> 外文OA文献 >Influence of the Hard-Faced Layer Welded on Tangential-Rotary Pick Operational Part on to Its Wear Rate

【2h】

Influence of the Hard-Faced Layer Welded on Tangential-Rotary Pick Operational Part on to Its Wear Rate

机译：硬面层焊接在切向旋转镐的影响对其磨损率的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Krzysztof Krauze; Tadeusz Skowronek; Kamil Mucha;
展开▼
作者单位

展开▼
年度 2016
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Influence of the Hard-Faced Layer Welded on Tangential-Rotary Pick Operational Part on to its Wear Rate [J] . Krzysztof Krauze, Tadeusz Skowronek, Kamil Mucha Archives of mining sciences . 2016,第4期

机译：切向旋转拾取操作部件上焊接的硬质面层对其磨损率的影响
2. Effect of welding conditions on erosive wear of hard-faced Co-based alloy layer [J] . Venkatesh Begori, Malvi Bharti, Roy Manish, Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology . 2018,第11期

机译：焊接条件对硬面公司合金层腐蚀磨损的影响
3. INFLUENCE OF THE TEMPERIG TEMPERATURE AND LASER BEAM ON HARDNESS AND WEAR OF THE OVERLAY WELDED LAYERS [J] . Ambroza P., Pupelis E., Pilkait? T. Mechanika . 2012,第6期

机译：温度和激光束对堆焊层硬度和磨损的影响
4. Formation of wear resistance surface alloyed layers on AZ31B substrate using TIG welding technique [C] . T. Mosarrezaie, S. F. Kashani Bozorg, H. M. Ghasemi Tehran International Congress on Manufacturing Engineering . 2005

机译：使用TIG焊接技术在AZ31B基板上形成耐磨性表面合金层
5. Effects of tool geometry and welding rates on the tool wear behavior and shape optimization in friction stir welding of aluminum alloy 6061 + 20% aluminum oxide MMC. [D] . Prado, Rafael Arcangel. 2005

机译：刀具几何形状和焊接速率对6061 + 20％氧化铝MMC铝合金的搅拌摩擦焊接中刀具磨损行为和形状优化的影响。
6. The Influence of Microstructure on Abrasive Wear Micro-Mechanisms of the Claddings Produced by Welding Used in Agricultural Soil [O] . Aleksandra Królicka, Łukasz Szczepański, Łukasz Konat, 2020

机译：显微组织对农用土壤焊接熔覆层磨耗微观机制的影响
7. Influencia de la microestructura en el comportamiento a desgaste abrasivo evaluado bajo norma ASTM G 65 de depósitos de soldadura antidesgaste aplicados sobre sustratos de acero de baja aleación y bajo carbono / Influence of microstructure on the behavior abrasive wear tested under ASTM G 65 weld deposits on substrates used wear low alloy steel and low carbon [O] . Pérez Cepeda Jaime Andrés 2011

机译：根据asTm G 65标准评估在低合金和低碳钢基材上施加的抗磨焊接沉积物的微观结构对磨料磨损性能的影响/微观结构对根据asTm G 65焊接沉积物在基材上测试的磨料磨损性能的影响使用的是低合金钢和低碳钢

Influence of the Hard-Faced Layer Welded on Tangential-Rotary Pick Operational Part on to Its Wear Rate

著录项

引文网络

相似文献

相关主题

期刊订阅