首页> 外文OA文献 >Strength and Toughness of Cold-rolled 32Mn-7 Cr Steel at Cryogenic Temperatures

【2h】

Strength and Toughness of Cold-rolled 32Mn-7 Cr Steel at Cryogenic Temperatures

机译：冷轧32Mn-7 Cr钢的强度和韧性在低温温度下

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Tetsumi YURI; Kotobu NAGAI; Keisuke ISHIKAWA;
展开▼
作者单位

展开▼
年度 1988
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Strength and toughness properties of two nitrogen alloyed stainless steels and their submerged arc weldments at cryogenic temperatures [J] . Deimel P., Hoffmann M., Fischer H. Journal of Materials Science . 1998,第4期

机译：两种氮合金不锈钢及其埋弧焊件在低温下的强度和韧性性能
2. Effect of Microstructure on Fracture Toughness Obtained by Small Specimen of Austenitic Stainless Steels Welds at Cryogenic Temperatures(Study on low temperature materials used in WE-NET-5) [J] . 绪形俊夫、由利哲美材料とプロセス: 日本鉄鋼協会講演論文集 . 1998,第6期

机译：显微组织对低温下奥氏体不锈钢焊缝小试样获得的断裂韧性的影响（WE-NET-5中使用的低温材料研究）
3. Effect of Microstructure on Fracture Toughness Obtained by Small Specimen of Austenitic Stainless Steels Welds at Cryogenic Temperatures(Study on low temperature materials used in WE-NET-5) [J] . 绪形俊夫、由利哲美材料とプロセス: 日本鉄鋼協会講演論文集 . 1998,第6期

机译：微观结构对低温温度奥氏体不锈钢焊缝焊缝裂缝韧性的影响（WE-NET-5中使用的低温材料研究）
4. Fracture toughness evaluation of SUS316LN and 9Ni steel at cryogenic temperature [C] . Arata Nishimura, Toshio Ogata, Arman Nyilas 低温工学·超電導学会会議 . 2001

机译：低温温度下SUS316LN和9％NI钢的断裂韧性评价
5. Influence of cryogenic treatment on microstructure and mechanical properties of high strength AISI D2 tool steel =Influence du traitement cryogenique sur la microstructure et les proprietes mecaniques de l'acier AISI D2 [D] . Ghasemi Nanesa, Hadi. 2016

机译：低温处理对高强度AISI D2工具钢的组织和力学性能的影响=低温处理对AISI D2钢的组织和力学性能的影响
6. Torsional shear strength of steel joined with high performance aerospace adhesives at cryogenic and elevated temperatures [O] . Gurdial Blugan, Gustavo Mata-Osoro, Simon Fecht, -1

机译：在低温和高温下结合高性能航空航天粘合剂的钢的扭转剪切强度
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Strength and toughness of stainless steels at cryogenic temperature. [R] . J. W. Morris 1991

机译：不锈钢在低温下的强度和韧性。

Strength and Toughness of Cold-rolled 32Mn-7 Cr Steel at Cryogenic Temperatures

著录项

引文网络

相似文献

相关主题

期刊订阅