首页> 外文OA文献 >Vat Photopolymerization Additive Manufacturing Resins: Analysis and Case Study

【2h】

Vat Photopolymerization Additive Manufacturing Resins: Analysis and Case Study

机译：增值税光聚合添加剂制造树脂：分析和案例研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
João Fiore Parreira Lovo; Italo Leite de Camargo; Rogério Erbereli; Mateus Mota Morais; Carlos Alberto Fortulan;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Vat Photopolymerization Additive Manufacturing Resins: Analysis and Case Study [J] . Lovo Jo?o Fiore Parreira, Camargo Italo Leite de, Erbereli Rogério, Materials Research . 2020,第4期

机译：增值税光聚合添加剂制造树脂：分析和案例研究
2. Investigation on the failure mechanism of triply periodic minimal surface cellular structures fabricated by Vat photopolymerization additive manufacturing under compressive loadings [J] . Keshavarzan M., Kaclichodaei M., Badrossamay M., Mechanics of materials . 2020,第Jana期

机译：压缩载荷作用下Vat光聚合增材制造三周期周期性最小表面胞结构的失效机理研究
3. Modeling A Scanning-Mask Projection Vat Photopolymerization System For Multiscale Additive Manufacturing [J] . Journal of Materials Processing Technology . 2020,第期

机译：用于多尺度添加剂制造的扫描掩模投影增值税光聚合系统
4. Development of Bovine Serum Albumin-based Resins for Additive Manufacturing via Vat Photopolymerization [C] . Patrick T. Smith, Benjaporn Narupai, S. Cem Millik, Conference on Novel Patterning Technologies for Semiconductors, MEMS/NEMS and MOEMS . 2020

机译：牛血清白蛋白基树脂用于通过增值税光聚合进行增材制造的开发
5. A Study of Layer Orientation on the Fracture Behavior of Two Additively Manufactured Thermoset Resins [D] . Brunstad, Nicholas John. 2021

机译：两种含有热固性树脂裂缝行为的层取向研究
6. Fabrication of High Permittivity Resin Composite for Vat Photopolymerization 3D Printing: Morphology Thermal Dynamic Mechanical and Dielectric Properties [O] . Asish Malas, Dmitry Isakov, Kevin Couling, 2019

机译：增值税光聚合3D打印用高介电常数树脂复合材料的制备：形态热动态力学和介电性能
7. Performance Simulation and Verification of Vat Photopolymerization Based, Additively Manufactured Injection Molding Inserts with Micro-Features [O] . Mischkot, Michael, Hofstätter, Thomas, Michailidou, Ifigeneia, 2018

机译：基于微量特征的增值制造注塑成型嵌入式增塑树脂的性能模拟与验证
8. Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites. [R] . Grady, J. E., Haller, W. J., Patterson, C., 2015

机译：通过添加剂制造实现完全非金属燃气涡轮发动机第一部分：系统分析，部件识别，添加剂制造和聚合物复合材料的测试。

Vat Photopolymerization Additive Manufacturing Resins: Analysis and Case Study

著录项

引文网络

相似文献

相关主题

期刊订阅