首页> 外文OA文献 >Welding residual stresses around nozzles in the thick-wall pressure vessels.

【2h】

Welding residual stresses around nozzles in the thick-wall pressure vessels.

机译：焊接厚壁压力容器中喷嘴周围的残余应力。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Kenji Iwai; Eiji Takahashi;
展开▼
作者单位

展开▼
年度 1986
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Residual stresses in the welding joint of the nozzle-to-head area of a layered high-pressure hydrogen storage tank [J] . Xu Shugen, Wei Renchao, Wang Weiqiang, International journal of hydrogen energy . 2014,第21期

机译：分层高压储氢罐的喷嘴至头部区域的焊接接头中的残余应力
2. The safe-end length effect on welding residual stresses in dissimilar metal welds of surge nozzles [J] . Tae-Kwang Song, Chang-Young Oh, Ji-Soo Kim Engineering Fracture Mechanics . 2011,第9期

机译：安全端长度对浪涌喷嘴异种金属焊缝中焊接残余应力的影响
3. Comparative Study for Stresses in Nozzle and Flange Welds Generated During Conventional Pressure Testing and Local Pressure Testing Using Bolted Devices [J] . Ayman M. Cheta, Richard Brodzinski Journal of Pressure Vessel Technology . 2007,第4期

机译：常规压力测试和使用螺栓装置进行局部压力测试期间在喷嘴和法兰焊缝中产生应力的比较研究
4. A Study on the Mechanical Stress Improvement Process to Mitigate Residual Stresses in Reactor Pressure Vessel Head Penetration Nozzle Welds [C] . Seung Gun Lee, Jong Sung Kim, Tae Eun Jin International Congress on Advances in Nuclear Power Plants . 2005

机译：电力压力容器头穿透喷嘴焊接中减轻残余应力的机械应力改进过程研究
5. Finite Element Simulation of Fillet Welds: Influence of Weld Contact Angle and Metallurgical Phase Changes on Residual Stresses [D] . Zhang, Chao. 2014

机译：圆角焊缝的有限元模拟：焊接接触角的影响和冶金相变对残余应力的影响
6. Welding Temperature Distribution and Residual Stresses in Thick Welded Plates of SA738Gr.B Through Experimental Measurements and Finite Element Analysis [O] . Xiaoyu Yang, Guizhen Yan, Yanfei Xiu, 2019

机译：实验测量和有限元分析的SA738Gr.B厚板焊接温度分布及残余应力
7. An Efficient Method for Estimation of Reduction of Welding Residual Stresses from Stress-Relief Annealing (Report II) : The Characteristics of Reduction of Welding Residual Stresses in Very Thick Joints during SR Treatment(Mechanics, Strength Structural Design) [O] . NAKACHO Keiji, UEDA Yukio 2013

机译：一种有效的从应力消除退火中减少焊接残余应力的方法（报告II）：SR处理过程中非常厚的接头的焊接残余应力减小的特征（力学，强度和结构设计）
8. Residual Stresses at Weld Repairs in Pressure Vessels. [R] . rybicki, e. f. stonesifer, r. b. 1978

机译：压力容器焊缝维修中的残余应力。

Welding residual stresses around nozzles in the thick-wall pressure vessels.

著录项

引文网络

相似文献

相关主题

期刊订阅