首页> 外文OA文献 >Dynamic Analysis of Latch-in Relay Using 3-D Finite Element Method with Mesh Modification Method Employing Multi-Mesh and the Interpolation

【2h】

Dynamic Analysis of Latch-in Relay Using 3-D Finite Element Method with Mesh Modification Method Employing Multi-Mesh and the Interpolation

机译：采用多网格与插值的网状改进方法，使用三维有限元法动态分析。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
T. YAMAGUCHI; Y. KAWASE; T. ASANO;
展开▼
作者单位

展开▼
年度 2013
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Dynamic Analysis of Latch-in Relay Using 3-D Finite Element Method with Mesh Modification Method Employing Multi-Mesh and the Interpolation [J] . T. YAMAGUCHI, Y. KAWASE, T. ASANO 日本AEM学会誌 . 2013,第3期

机译：多网格插补的3-D有限元网格修正法闭锁继电器动态分析
2. Dynamic Analysis Method of Linear Resonant Actuator With Multimovers Employing 3-D Finite Element Method [J] . Asai Y., Hirata K., Ota T. Magnetics, IEEE Transactions on . 2010,第8期

机译：采用3-D有限元法的多动体线性谐振执行器动力学分析方法
3. Dynamic analysis of linear actuator taking into account eddy currents using finite element method and 3-D mesh coupling method [J] . Tani K., Yamada T. IEEE Transactions on Magnetics . 1999,第3期

机译：考虑涡流的线性执行器动态分析的有限元和3-D网格耦合方法
4. Dynamic characteristics analysis of circuit breaker with oil dashpot employing improved multi-mesh modification method [C] . Suzuki S., Kawase Y., Yamaguchi T., 2012 20th International Conference on Electrical Machines. . 2012

机译：改进的多网格修正法分析带油缓冲器断路器的动态特性
5. A Scalable Software Framework for Solving PDES on Distributed Octree Meshes Using Nite Element MethodsA scalable software framework for solving pdes on distributed octree meshes using finite element methods [D] . Lofquist, Alec Dale. 2018

机译：使用NITE元素MetableA可扩展软件框架在分布式Octree网格上求解PDE的可扩展软件框架，用于使用有限元方法在分布式Octree网格上求解PDES
6. Comparative modelling of crack propagation in elastic–plastic materials using the meshfree local radial basis point interpolation method and eXtended finite-element method [O] . Yazhe Li, Nengxiong Xu, Jinzhi Tu, 2019

机译：使用无网格局部径向基点插值法和扩展有限元法对弹塑性材料中裂纹扩展进行比较建模
7. Analysis and Optimization of Tooth Surface Contact Stress of Gears with Tooth Profile Deviations, Meshing Errors and Lead Crowning Modifications Based on Finite Element Method and Taguchi Method [O] . Qiang Li, Liyang Xie 2020

机译：基于有限元法和塔布芯法的齿形偏差，啮合误差，啮合误差和铅冠改性的齿面接触应力分析与优化
8. Analysis of Corner Cracks at Hole by a 3-D Weight Function Method with Stressesfrom Finite Element Method [R] . Zhao, W., Newman, J. C., Sutton, M. A., 1995

机译：作者：张莹莹，王汝传，闫澍旺，工程力学ENGINEERING mECHaNICs应力三维加权函数有限元法分析孔角拐点

Dynamic Analysis of Latch-in Relay Using 3-D Finite Element Method with Mesh Modification Method Employing Multi-Mesh and the Interpolation

著录项

引文网络

相似文献

相关主题

期刊订阅