首页> 外文OA文献 >The influence of the tool base on the formation of stresses in wear-resistant coatings in the cutting process

【2h】

The influence of the tool base on the formation of stresses in wear-resistant coatings in the cutting process

机译：工具基底对切削过程中耐磨涂层应力形成的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Aleksey Chikhranov; Vladimir Tabakov; Olga Nazarova;
展开▼
作者单位

展开▼
年度 2018
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Influence of cutting parameters, tool coatings and friction on the process heat in cutting processes and phase transformations in workpiece surface layers [J] . V. Schulze, J. Michna, F. Zanger, HTM: Zeitschrift fur Werkstoffe Warmebehandlung Fertigung . 2013,第1期

机译：切削参数，工具涂层和摩擦对切削过程中的过程热以及工件表面层中的相变的影响
2. Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools [J] . Vereschaka Alexey, Tabakov Vladimir, Grigoriev Sergey, Surface & Coatings Technology . 2020,第1期

机译：碳化物切割工具切割磨损耐磨层耐磨层耐磨层厚度的影响
3. Influence of the thickness of nanolayers in wear-resistant layer of Ti-TiN-(Ti,Cr,Al)N coating on the tool life and wear pattern of the carbide cutting tools in steel turning [J] . Alexey Vereschaka, Marina Volosova, Nikolay Sitnikov, Procedia CIRP . 2021,第a期

机译：钢结构耐腐蚀层耐磨层耐磨层耐磨层厚度的影响
4. Development of a method of applying nanostructured and wear-resistant coatings with high adhesion to the surface of the cutting tool [C] . A E Litvinov, V U Buzko, E Yu Balaev International Conference on Mechanical Engineering, Automation and Control Systems . 2019

机译：一种在切削工具表面施加纳米结构和耐磨涂层的方法的研制
5. Investigation of high speed flat end milling process-prediction of chip formation, cutting forces, tool stresses and temperatures. [D] . Ozel, Tugrul. 1998

机译：研究高速平端铣削过程-预测切屑形成，切削力，刀具应力和温度。
6. Process Recovery after CaO Addition Due to Granule Formation in a CSTR Co-Digester—A Tool to Influence the Composition of the Microbial Community and Stabilize the Process? [O] . Marietta Liebrich, Anne Kleyböcker, Monika Kasina, 2016

机译：在CSTR共二酸酯中形成颗粒后添加CaO后的过程恢复-一种影响微生物群落组成并稳定过程的工具吗？
7. Cutting speed setting at steel machining with hard-alloy tool and with wear-resistant coating based on preliminary rapid definition of contact pairs [O] . Александр Плотников, Aleksandr Plotnikov, Александр Сергеев, 2019

机译：用硬合金工具和耐磨涂层钢加工切割速度设定，基于接触对的初步快速定义
8. Review of the Use of Wear-Resistant Coatings in the Cutting-Tool Industry [R] . Salik, J. 1983

机译：关于在刀具行业中使用耐磨涂层的评述

The influence of the tool base on the formation of stresses in wear-resistant coatings in the cutting process

著录项

引文网络

相似文献

相关主题

期刊订阅