首页> 外文OA文献 >Evaluation of tearing instability by means of recrystallization-etch technique. Comparison of fracture toughness between through crack specimens and part-through crack specimens.

【2h】

Evaluation of tearing instability by means of recrystallization-etch technique. Comparison of fracture toughness between through crack specimens and part-through crack specimens.

机译：通过再结晶蚀刻技术评估撕裂不稳定性。通过裂纹标本和部分通过裂纹标本之间的断裂韧性的比较。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Kunio ONISAWA; Tetsuo SHOJI; Hideaki TAKAHASHI; Kotoji ANDO;
展开▼
作者单位

展开▼
年度 1985
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Comparison of crack-arrest fracture toughness between low and high heat-input thick weld specimens [J] . An Gyu Baek, Woo Wanchuck, Park Jeong Ung, International Journal of Fracture . 2015,第2期

机译：低热输入和高热输入厚焊缝试样的裂纹止裂断裂韧性比较
2. ON THE SIZE OF CYLINDRICAL SPECIMENS WITH A CIRCUMFERENTIAL CRACK FOR EVALUATING THE FRACTURE TOUGHNESS OF MATERIALS [J] . V. I. Smirnov Strength of Materials . 2012,第4期

机译：带有圆周裂纹的圆柱试样的尺寸以评估材料的断裂韧性
3. Crack Size Evaluation Using Unloading Compliance in Single-Specimen Single-Edge-Notched Tension Fracture Toughness Testing [J] . G. Shen, W. R. Tyson Journal of testing and evaluation . 2009,第4期

机译：在单试样单边缺口缺口断裂韧性测试中使用卸载顺应性评估裂纹尺寸
4. SMALL-SIZE SPECIMEN WITH HARD ZONES NEAR CRACK TIP FOR FRACTURE TOUGHNESS EVALUATION OF PRESSURE VESSEL IN SERVICE (PART I : CONSTRAINT EFFECT OF LASER WELDS ON K_(IC)-TOUGHNESS MEASUREMENT) [C] . Eiichi Yanagisawa, Katsuya Kajimoto, Shunji Shibata, ASME/JSME joint pressure vessels and piping conference . 1998

机译：裂纹尖端附近的小尺寸试样，用于评估维修中压力容器的断裂韧性（第一部分：激光焊接对K_（IC）-韧性测量的约束作用）
5. The effect of specimen size and crack depth on the elastic-plastic fracture toughness of a low-strength high-strain hardening steel [D] . Sorem, William Alan. 1989

机译：试样尺寸和裂纹深度对低强度高应变硬化钢弹性抗骨折韧性的影响
6. Effects of Crack Tip Constraint on the Fracture Toughness Assessment of 9 Ni Steel for Cryogenic Application in Liquefied Natural Gas Storage Tanks [O] . Young Kyun Kim, Byung Taek Oh, Jae Hoon Kim 2020

机译：裂纹尖端约束对液化天然气储罐低温应用的裂缝韧性评价的影响
7. Evaluation of fatigue life for crack initiation and fracture of notched specimens. [O] . Hironobu NISITANI, Masato WATARIKAWA, Masahiro ENDO 1985

机译：裂缝寿命疲劳寿命评价裂缝寿命和缺口标本骨折。
8. Fracture Toughness Comparison between a Semielliptical Surface Crack in a 4PBPlate and a Through-Thickness Crack in a 3PB Fracture Toughness Test Specimen [R] . Nevalainen, M. J. 1997

机译：4pBplate中半椭圆表面裂纹与3pB断裂韧性试样中贯穿厚度裂纹的断裂韧性比较

Evaluation of tearing instability by means of recrystallization-etch technique. Comparison of fracture toughness between through crack specimens and part-through crack specimens.

著录项

引文网络

相似文献

相关主题

期刊订阅