首页> 外文OA文献 >Gas Pressure Welding Method of Rails by Mixed Gas of Hydrogen and Ethylene Gas

【2h】

Gas Pressure Welding Method of Rails by Mixed Gas of Hydrogen and Ethylene Gas

机译：氢气和乙烯气体混合气体轨道气体压力焊接方法

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Ryu-ichi YAMAMOTO; Mitsumasa TATSUMI; Hajime ITOH; Yoshihiro TERASHITA; Yoshifumi YOSHIDA;
展开▼
作者单位

展开▼
年度 2014
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Gas Pressure Welding Method of Rails by Mixed Gas of Hydrogen and Ethylene Gas [J] . Ryu-ichi YAMAMOTO, Mitsumasa TATSUMI, Hajime ITOH, Quarterly reports of RTRI . 2014,第1期

机译：氢气和乙烯气混合气的钢轨气压焊接方法
2. Gas Pressure Welding Method of Rails by Mixed Gas of Hydrogen and Ethylene Gas [J] . Ryu-ichi YAMAMOTO, Mitsumasa TATSUMI, Hajime ITOH, Quarterly reports of RTRI . 2014,第1期

机译：氢气和乙烯气混合气的钢轨气压焊接方法
3. FATIGUE CRACK GROWTH BEHAVIOR OF A GAS PRESSURE WELDED PART OF RAIL STEEL UNDER MIXED MODE LOADING [J] . Chul-Su Kim, Jung-Kyu Kim Key Engineering Materials . 2007,第Pt1期

机译：混合加载下铁路钢气压力焊接零件的疲劳裂纹扩展行为。
4. FATIGUE CRACK GROWTH BEHAVIOR OF A GAS PRESSURE WELDED PART OF RAIL STEEL UNDER MIXED MODE LOADING [C] . Chul-Su Kim, Jung-Kyu Kim International Conference on The Mechanical Behavior of Materials; 20070527-31; Busan(KR) . 2007

机译：混合加载下铁路钢气压力焊接零件的疲劳裂纹扩展行为。
5. Hydrogenation of acetylene and ethylene using Pd foil as a model catalyst: Bridging the gap between UHV and high pressure. [D] . Molero, Hebert Moran. 1998

机译：以钯箔为模型催化剂，对乙炔和乙烯进行加氢：弥合超高压和高压之间的差距。
6. Pressure garment to prevent abnormal scarring after burn injury in adults and children: the PEGASUS feasibility RCT and mixed-methods study. [O] . Naiem Moiemen, Jonathan Mathers, Laura Jones, -1

机译：防止成人和儿童烧伤后出现异常疤痕的压力服装：PEGASUS可行性RCT和混合方法研究。
7. TENSILE STRENGTH CHARACTERISTICS OF GAS PRESSURE WELDED JOINTS OF REINFORCING STEEL BARS AT LOW TEMPERATURES AND A CONFIRMATION METHOD OF NORMALIZING WELDS : Experimental study on brittle fracture initiation characteristics of gas pressure welded joints of reinforcing steel bars at low temperatures. (III) [O] . MORIHISA FUJIMOTO, TOSHIAKI FUJIMORI, TADAO NAKAGOMI, 1985

机译：低温加强钢筋气体压力焊接接头的拉伸强度特性及焊缝尺寸的确认方法：低温加固钢筋气体压力焊接接头脆性断裂特性的实验研究。（iii）
8. Tensile Properties of Welded or Sensitized 316Stainless Steel in High-Pressure Hydrogen Gas. [R] . raymond, e. l. vandervoort, r. r. 1977

机译：高压氢气中焊接或敏化316不锈钢的拉伸性能。

Gas Pressure Welding Method of Rails by Mixed Gas of Hydrogen and Ethylene Gas

著录项

引文网络

相似文献

相关主题

期刊订阅