首页> 外文OA文献 >Tool Wear during Turning of an Al-15volAl2O3-Particle Alloy Produced by Mechanical Alloying.

【2h】

Tool Wear during Turning of an Al-15volAl2O3-Particle Alloy Produced by Mechanical Alloying.

机译：通过机械合金化产生的Al-15Vol％Al2O3粒子合金的刀具磨损。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
TAKAO YAKO;
展开▼
作者单位

展开▼
年度 1992
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Structural study of Cu(2-x)Se alloys produced by mechanical alloying. [J] . Machado KD, de-Lima JC, Grandi TA, Acta Crystallographica, Section B. Structural Science . 2004,第3期

机译：机械合金化生产Cu（2-x）Se合金的结构研究。
2. Investigation of the wear and corrosion behaviors of Ti5Al2.5Fe and Ti6Al4V alloys produced by mechanical alloying method in simulated body fluid environment [J] . Simsek Ijlal, Ozyurek Dursun Materials science & engineering . 2019,第JANa期

机译：机械合金化法制备的Ti5Al2.5Fe和Ti6Al4V合金在模拟体液环境下的磨损和腐蚀行为研究
3. Investigation of the wear and corrosion behaviors of Ti5Al2.5Fe and Ti6Al4V alloys produced by mechanical alloying method in simulated body fluid environment [J] . Simsek Ijlal, Ozyurek Dursun Materials science & engineering, C. Materials for Biogical applications . 2019,第期

机译：模拟体液环境中机械合金化方法生产的Ti5Al2.5Fe和Ti6Al4V合金的磨损和腐蚀行为的研究
4. Investigation of Wear Properties of Al-4.5wt.Cu Nano-Composite Reinforced With Different Weight Percent of TiC Nano Particles Produced by Mechanical Alloying [C] . Rasul Azari Khosroshahi, Narguess Nemati, Masoud Emamy, International Conference on the Advancement of Materials and Nanotechnology . 2012

机译：Al-4.5wt的磨损性能研究。用机械合金化产生的不同重量百分比加固的Cu纳米复合材料
5. Investigating the Thermal and Phase Stability of Nanocrystalline Ni-W Produced by Electrodeposition, Sputtering, and Mechanical Alloying. [D] . Marvel, Christopher Jonathan. 2016

机译：研究通过电沉积，溅射和机械合金化生产的纳米晶Ni-W的热和相稳定性。
6. Thermo-Mechanical Coupling Analyses for Al Alloy Brake Discs with Al2O3-SiC(3D)/Al Alloy Composite Wear-Resisting Surface Layer for High-Speed Trains [O] . Lan Jiang, Yanli Jiang, Liang Yu, 2019

机译：高速列车用Al2O3-SiC（3D）/铝合金复合耐磨表面层的铝合金制动盘的热力耦合分析
7. Internal friction of Al alloys produced by mechanically alloying. [O] . Ken-ichiro HARA, Reiko KOJIMA, Takao ENDO 1995

机译：机械合金化生产的Al合金的内部摩擦。
8. Amorphous Metal Alloys Produced by Mechanical Alloying. [R] . Tiainen, T. J., Schwarz, R. B. 1989

机译：机械合金化生产非晶态金属合金。

Tool Wear during Turning of an Al-15volAl2O3-Particle Alloy Produced by Mechanical Alloying.

著录项

引文网络

相似文献

相关主题

期刊订阅