首页> 外文OA文献 >CYCLIC LOADING TEST TO CLARIFY NONLINEAR BEHAVIOR OF AN ISOLATED BRIDGE SUPPORTED BY HIGH DAMPING RUBBER BEARINGS

【2h】

CYCLIC LOADING TEST TO CLARIFY NONLINEAR BEHAVIOR OF AN ISOLATED BRIDGE SUPPORTED BY HIGH DAMPING RUBBER BEARINGS

机译：循环加载试验，以澄清高阻尼橡胶轴承支撑的隔离桥的非线性行为

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Gaku SHOJI; Kazuhiko KAWASHIMA; Atsushi SAITO;
展开▼
作者单位

展开▼
年度 2001
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. 基于有限元和集中质量法的带阻尼环滚动轴承支撑的柔性转子动力学分析 [J] . 朱海民, 陈蔚芳, 朱如鹏, 中南大学学报（英文版） . 2020,第012期
2. Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling [J] . Masashi Yamamoto, Shigeo Minewaki, Harumi Yoneda, Earthquake Engineering & Structural Dynamics . 2012,第13期

机译：高阻尼橡胶轴承在水平双向载荷下的非线性行为：全尺寸试验和分析模型
3. Effect of Material Characteristics of High Damping Rubber Bearings on Aseismic Behaviors of a Two-Span Simply Supported Beam Bridge [J] . Yumin Zhang, Jiawu Li Advances in materials science and engineering . 2020,第9期

机译：高阻尼橡胶轴承材料特性对双跨度支撑梁桥的抗震行为的影响
4. Shaking table test and analysis method on ultimate behavior of slender base-isolated structure supported by laminated rubber bearings [J] . Eiji Takaoka, Yasuo Takenaka, Arinori Nimura Earthquake Engineering & Structural Dynamics . 2011,第5期

机译：叠层橡胶支座支撑的细长基础隔震结构极限性能的振动台试验及分析方法
5. Seismic Response Assessment of Base-Isolated Bridges accounting for the Stress-Softening Behaviour of High Damping Natural Rubber Bearings [C] . E. Tubaldi, H. Ahmadi, A. Muhr, Proceedings of the Fifteenth international conference on civil, structural and environmental engineering computing . 2015

机译：考虑高阻尼天然橡胶轴承应力软化行为的基础隔震桥梁地震响应评估
6. Physical and numerical modeling of nonlinear cyclic load-deformation behavior of shallow foundations supporting rocking shear walls. [D] . Gajan, Sivapalan. 2006

机译：支撑摇摆剪力墙的浅层基础非线性循环荷载-变形特性的物理和数值模拟。
7. Load-bearing capacity of screw-retained CAD/CAM-produced titanium implantframeworks (I-Bridge®2) before and after cyclic mechanicalloading [O] . Marc Philipp DITTMER, Moritz NENSA, Meike STIESCH, 1928

机译：螺钉固定的CAD / CAM生产的钛植入物的承重能力循环机械前后的框架（I-Bridge®2）装货
8. Effect of Material Characteristics of High Damping Rubber Bearings on Aseismic Behaviors of a Two-Span Simply Supported Beam Bridge [O] . Yumin Zhang, Jiawu Li 2020

机译：高阻尼橡胶轴承材料特性对双跨度支撑梁桥的抗震行为的影响

CYCLIC LOADING TEST TO CLARIFY NONLINEAR BEHAVIOR OF AN ISOLATED BRIDGE SUPPORTED BY HIGH DAMPING RUBBER BEARINGS

著录项

引文网络

相似文献

相关主题

期刊订阅