首页> 外文OA文献 >Role of Fiber Finish in the Conversion of Fiber to Nonwovens — Part 1: Need for an Unconventional Method to Evaluate Finish Performance as a Mechanical Process Aid

【2h】

Role of Fiber Finish in the Conversion of Fiber to Nonwovens — Part 1: Need for an Unconventional Method to Evaluate Finish Performance as a Mechanical Process Aid

机译：纤维饰面在纤维转化为非织造带的作用 - 第1部分：需要一种非常规方法来评估饰面性能作为机械过程辅助

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Abdelfattah M. Seyam;
展开▼
作者单位

展开▼
年度 2001
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Evaluation of Distillers Grains That Have Undergone a Fiber Separation Process on Performance and Carcass Characteristics in Finishing Diets. [J] . Garland S. A., Boyd B. M., Hilscher F. H., Journal of Animal Science . 2018,第Suppla2期

机译：评估蒸馏器颗粒经历了纤维分离过程的精加工饮食中的性能和胴体特征。
2. Effect of the Carding Process and Reinforcement Method of Carbon Fiber/Polypropylene Fiber Nonwoven Fabrics on the Anisotropic Mechanical Properties of Hot-Pressed Composites [J] . Fibers and Polymers . 2020,第5期

机译：碳纤维/聚丙烯纤维非织造织物梳理过程和增强方法对热压复合材料的各向异性力学性能的影响
3. Effect of spin finish on fiber/binder adhesion in chemically bonded nonwovens [J] . Fourdrin S, Rochery M, Gengembre L, Journal of Applied Polymer Science . 2006,第5期

机译：纺丝油剂对化学粘合非织造布中纤维/粘合剂粘合力的影响
4. Role of fiber finish in the conversion of fiber to nonwovens: finish performance as a mechanical processing aid in carding [C] . Murali Velmurugan, Abdelfattah M.Seyam, Thomas J.Proffitt International Nonwovens Technical Conference September 26-28, 2000 Dallas, Texas . 2000

机译：纤维整理剂在纤维向非织造布转化中的作用：整理性能作为梳理机的机械加工助剂
5. ‘Green’ Finishing for Cellulose and Protein-Based Fibers and Fabrics [D] . Patil, Namrata Vinay. 2019

机译：'绿色'完成纤维素和基于蛋白质的纤维和织物
6. Effect of silage source physically effective neutral detergent fiber and undigested neutral detergent fiber concentrations on performance and carcass characteristics of finishing steers [O] . Murillo C S Pereira, Wenzhu Z Yang, Karen A Beauchemin, 2021

机译：青贮源物理有效中性洗涤剂纤维和未消化中性洗涤剂纤维浓度对精加工操纵子性能和胴体特性的影响
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Role of Fiber Finish in Wet Strength Retention of Glass Fibers [R] . Freske, S., Otto, W. H. 1966

机译：纤维面漆在玻璃纤维湿强度保持中的作用

Role of Fiber Finish in the Conversion of Fiber to Nonwovens — Part 1: Need for an Unconventional Method to Evaluate Finish Performance as a Mechanical Process Aid

著录项

引文网络

相似文献

相关主题

期刊订阅