首页> 外文OA文献 >Study on Failure Mechanism and Phase Transformation of 304 Stainless Steel during Erosion Wear

【2h】

Study on Failure Mechanism and Phase Transformation of 304 Stainless Steel during Erosion Wear

机译：侵蚀磨损304个不锈钢的故障机理和相变机理研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Youjun Ye; Jing Li; Xingxing Lv; Lin Liu;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Erosive Wear Study of the AISI 201LN Stainless Steel: A Comparison with the AISI 304 and AISI 410 Stainless Steels [J] . Marques de Oliveira Ana Paula, Houmard Manuel, Labiapari Wilian da Silva, Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2019,第4期

机译：AISI 201LN不锈钢的腐蚀磨损研究：与AISI 304和AISI 410不锈钢的比较
2. Erosion-wear and intergranular corrosion resistance properties of AISI 304L austenitic stainless steel after low-temperature plasma nitriding [J] . Qin Xujuan, Guo Xianglong, Lu Junqiang, Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics . 2017,第期

机译：低温等离子体氮气后AISI 304L奥氏体不锈钢侵蚀磨损和晶间耐腐蚀性
3. On the erosive wear of 304 L stainless steel caused by olive seed particles impact: Modeling and experiments [J] . Bahri Amir, Guermazi Noamen, Elleuch Khaled, Tribology International . 2016,第Null期

机译：橄榄种子颗粒对304 L不锈钢腐蚀磨损的影响：建模与实验
4. Pulsed laser beam welding of 304 to 304L stainless steel: effects of welding parameters on cracking and phase transformations [C] . Patrick W. Hochanadel, Mark J. Cola, Ann M. Kelly, Materials Solutions on Joining of Advanced and Specialty Materials Conference . 2002

机译：脉冲激光束焊接为304至304L不锈钢：焊接参数对开裂和相变的影响
5. PHASE TRANSFORMATIONS AND HEAT-TREATMENT STUDIES OF A CONTROLLED - TRANSFORMATION STAINLESS-STEEL ALLOY. [D] . AGGEN, GEORGE. 1963

机译：受控相变不锈钢合金的相变和热处理研究。
6. Dataset and methodology on identification and correlation of secondary carbides with microstructure wear mechanism and tool performance for different CERMET grades during high-speed dry finish turning of AISI 304 stainless steel [O] . Uttkarsh Patel, Sushant Rawal, A.F.M. Arif, 2020

机译：在高速干燥结束后AISI 304不锈钢的高速干燥结束过程中二级碳化物识别和相关机构和工具性能的识别和相关性的数据集和方法
7. Assessment of the cavitation erosion resistance in high nitrogen austenitic stainless steels: study of the wear mechanisms [O] . Grajales, Dairo Hernan Mesa, Ospina, Carlos Mario Garzon, Tschiptschin, Andre Paulo 2010

机译：高氮奥氏体不锈钢中抗气蚀侵蚀的评估：磨损机理的研究
8. Hydrogen-Induced Phase Transformations in Type 304L Stainless Steels [R] . Holzworth, M. L., Louthan, M. R. 1968

机译：304L不锈钢中的氢致相变

Study on Failure Mechanism and Phase Transformation of 304 Stainless Steel during Erosion Wear

著录项

引文网络

相似文献

相关主题

期刊订阅