首页> 外文OA文献 >High-toughness Heavy Section Steel Plate with Minimum Yield Strength of 900 MPa for Deep Submergible Vehicle

【2h】

High-toughness Heavy Section Steel Plate with Minimum Yield Strength of 900 MPa for Deep Submergible Vehicle

机译：高韧性重型钢板，最小屈服强度为900MPa，用于深潜水型载体

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Ko MORIYAMA; Hirofumi YOSHIMURA; Katsuo KAKU;
展开▼
作者单位

展开▼
年度 1983
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Production and properties of thermomechnically rolled high strength steel plates with minimum yield strengths up to 700 Mpa [J] . A. Kern, T. Niessen, U. schriever Ironmaking & Steelmaking . 2005,第4期

机译：最小屈服强度高达700 Mpa的热机械轧制高强度钢板的生产和性能
2. Strengthening and Toughening of a Heavy Plate Steel for Shipbuilding with Yield Strength of Approximately 690 MPa [J] . DONGSHENG LIU, BINGGUI CHENG, YUANYUAN CHEN Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2013,第1期

机译：造船用厚钢板的增强和增韧，屈服强度约为690 MPa
3. MAG Welding Tests of Modern High Strength Steels with Minimum Yield Strength of 700 MPa [J] . Teemu Lahtinen, Pedro Vila?a, Pasi Peura, Applied Sciences . 2019,第5期

机译：最小屈服强度为700 MPa的现代高强度钢的MAG焊接试验
4. Modern High-Strength Steels with Minimum Yield Strengths up to 690 Mpa and High Component Safety [C] . H.-J. Kaiser, A. Kern, T. Niessen, International Offshore and Polar Engineering Conference . 2001

机译：现代高强度钢，屈服强度高达690 MPa和高成分安全性
5. An Atom Probe Tomographic Investigation of High-Strength, High-Toughness Precipitation Strengthened Steels for Naval Applications. [D] . Hunter, Allen H. 2012

机译：用于海军用途的高强度，高韧性沉淀强化钢的原子探针层析成像研究。
6. Neutron Diffraction Evaluation of Near Surface Residual Stresses at Welds in 1300 MPa Yield Strength Steel [O] . Ebrahim Harati, Leif Karlsson, Lars-Erik Svensson, 2017

机译：1300 MPa屈服强度钢焊接时近表面残余应力的中子衍射评价。
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

High-toughness Heavy Section Steel Plate with Minimum Yield Strength of 900 MPa for Deep Submergible Vehicle

著录项

引文网络

相似文献

相关主题

期刊订阅