首页> 外文OA文献 >Clogging-free nozzle conditions and metallurgical effects of powder injection practice in hot metal pretreatment.

【2h】

Clogging-free nozzle conditions and metallurgical effects of powder injection practice in hot metal pretreatment.

机译：无堵塞喷嘴条件和粉末注射实践在热金属预处理中的冶金作用。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Yoshiyasu SHIROTA; Katsukiyo MARUKAWA; Nobuyoshi HIROKI; Hiroyuki IKEMIYA;
展开▼
作者单位

展开▼
年度 1987
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Preparation and Microstructural Characterisation of Metal Injection Moulded Powder Metallurgical Components (MIM) in the Green and Sintered Conditions [J] . Jorg Maier, Volker Knoblauch, Timo Bernthaler Practical Metallography . 2013,第10期

机译：生坯和烧结条件下金属注射成型粉末冶金部件（MIM）的制备和微观结构表征
2. A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions [J] . Semiatin S. L., Mahaffey D. W., Tung D. J., Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2017,第4期

机译：粉末冶金镍基超合金塑性响应比较名义上 - 等温和瞬态加热热工作条件的比较
3. Some features on hot forging of powder metallurgy sintered high strength 4%titanium carbide composite steel preforms under different stress state conditions [J] . R. Narayanasamy, V. Senthilkumar, K.S. Pandey Materials & design . 2008,第7期

机译：不同应力状态下粉末冶金烧结高强度4％碳化钛复合钢坯的热锻性能
4. ASSESSMENT OF POWDER METALLURGY-HOT ISOSTATIC PRESSED NOZZLE- TO-SAFE END TRANSITION JOINTS [C] . Ben Sutton, David Gandy ASME Pressure Vessels and Piping conference . 2017

机译：粉末冶金热等静压喷嘴到安全端过渡接头的评估
5. Powder metallurgy: Effects of lubricants on the flow characteristics of metal powder within the die [D] . Paullin, Donald Marvin -1

机译：粉末冶金：润滑剂对模具内金属粉末流动特性的影响
6. Effects of Temperature and Pressure of Hot Isostatic Pressing on the Grain Structure of Powder Metallurgy Superalloy [O] . Liming Tan, Guoai He, Feng Liu, 2018

机译：等静压的温度和压力对粉末冶金高温合金晶粒结构的影响
7. Comparison of the Cracking Behavior of Powder Metallurgy and Ingot Metallurgy Ti-5Al-5Mo-5V-3Cr Alloys during Hot Deformation [O] . Qinyang Zhao, Fei Yang, Rob Torrens, 2019

机译：粉末冶金和铸锭冶金Ti-500-5V-3CR合金裂解性能的比较热变形
8. Powder Metallurgy, Manufacture of A1M3 Erosion Test Nozzles from Sintered Copper, Iron and Stainless Steel Powders [R] . Burghardt, A. M., Gebhardt, L. F. 1948

机译：粉末冶金，从烧结铜，铁，不锈钢粉末a1m3腐蚀试验喷嘴制造

Clogging-free nozzle conditions and metallurgical effects of powder injection practice in hot metal pretreatment.

著录项

引文网络

相似文献

相关主题

期刊订阅