首页> 外文OA文献 >A Torsional Strength Analysis on the Container Ship by Means of the Finite Element Procedure and Full-Scale Testing

【2h】

A Torsional Strength Analysis on the Container Ship by Means of the Finite Element Procedure and Full-Scale Testing

机译：通过有限元手术和全尺度测试对集装箱船的扭转力分析

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Noboru Tanaka; Shigeo Sanbongi; Takashi Iwaki; Keisuke Enomoto; Tsuneo Yoshiki; Shigeru Koshikawa; Tadahiko Kawai;
展开▼
作者单位

展开▼
年度 1970
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Ultimate strength of container ships subjected to combined hogging moment and bottom local loads part 1: Nonlinear finite element analysis [J] . Tatsumi Akira, Fujikubo Masahiko Marine Structures . 2020,第Jana期

机译：承受弯矩和底部局部载荷共同作用的集装箱船的极限强度第1部分：非线性有限元分析
2. Strength of a Container Ship in Extreme Waves Obtained by Nonlinear Hydroelastoplasticity Dynamic Analysis and Finite Element Modeling [J] . Weiqin Liu, Xuemin Song, Weiguo Wu, Journal of offshore mechanics and arctic engineering . 2016,第3期

机译：非线性水弹塑性动力学分析和有限元建模获得的极端波浪中集装箱船的强度
3. Statistical Analysis of Vertical and Torsional Whipping Response Based on Full-Scale Measurement of a Large Container Ship [J] . Ryo Hanada, Tetsuo Okada, Yasumi Kawamura, Applied Sciences . 2020,第8期

机译：基于大集装箱船全规模测量的垂直扭转次响应统计分析
4. A hydroelastic vibration analysis of a container ship using finite element and boundary element methods [C] . Ahmet Ergin, Bahadir Ugurlu, Levent Kaydihan International Congress and Exhibition on Noise Control Engineering . 2007

机译：使用有限元和边界元方法对集装箱船的液压弹性振动分析
5. Pile Behaviors in Shales Through Full-Scale Static Load Testing, Dynamic Testing, and Finite Element Analysis [D] . Islam, Shafiqul. 2021

机译：通过全规模静态负载测试，动态测试和有限元分析桩行为
6. Critical evaluation of fracture strength testing for endodontically treated teeth: a finite element analysis study [O] . Emel Uzunoglu-Özyürek, Selen Küçükkaya Eren, Oğuz Eraslan, 2019

机译：牙髓治疗牙齿的断裂强度测试的关键评估：有限元分析研究
7. Ultimate Longitudinal Strength of Ships' Hull Girder under Combined Loading — 3rd Report: Introduction of the effect of bulkheads and side structures to torsional analysis with using 1 dimensional finite element method — [O] . Yusuke Komoriyama, Yoshiteru Tanaka, Akira Tatsumi, 2019

机译：船舶船体围岩纵向强度在载荷组合下 - 第3次报告：使用1尺寸有限元方法引入舱壁和侧面结构对扭转分析的影响 -

A Torsional Strength Analysis on the Container Ship by Means of the Finite Element Procedure and Full-Scale Testing

著录项

引文网络

相似文献

相关主题

期刊订阅