首页> 外文OA文献 >3D‐Printed Multilayered Reinforced Material System for Gas Supply in CubeSats and Small Satellites

【2h】

3D‐Printed Multilayered Reinforced Material System for Gas Supply in CubeSats and Small Satellites

机译：用于立方体和小型卫星的用于气体供应的3D印刷多层增强材料系统

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Nimesh Singhal; Igor Levchenko; Shiyong Huang; Luxiang Xu; George-Cristian Potrivitu; Oleksii Cherkun; Jinghua Fang; Kateryna Bazaka; Shuyan Xu;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. 3D BIOPRINTING: A STATE-OF-THE-ART REVIEW ON PRINTING TECHNIQUES 3D printing of organic and inorganic materials requires special consideration in both material selection and the process used [J] . Ramesh Haripriya, Narayan Roger J., Zuev Dmitry M. Advanced Materials & Processes . 2020,第5期

机译：3D BioPlinting：关于印刷技术的最先进的综述有机和无机材料的3D印刷需要在材料选择和使用的过程中进行特殊考虑
2. Experimental approximation of the sound absorption coefficient (∝) for 3D printed reentrant auxetic structures of poly lactic acid reinforced with chicken keratin materials [J] . Amaya-Amaya Vicente, de Icaza-Herrera Miguel, Laura Martinez-Hernandez Ana, Materials Letters . 2021,第Jana15期

机译：用鸡角蛋白材料加固多3D印刷重圈舒张结构的吸声系数（α）的实验近似
3. A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties [J] . Kabir S. M. Fijul, Mathur Kavita, Seyam Abdel-Fattah M. Composite Structures . 2020,第Jana期

机译：3D打印连续纤维增强复合材料的重要评论：历史，机理，材料和性能
4. Investigation of the processes of modification of polyimide systems required to create reinforced composite materials by 3d printing [C] . A S Egorov, M V Bogdanovskaya, D S Gudeeva, International Russian-Chinese Symposium "New Materials and Technologies" . 2020

机译：通过3D打印制定增强复合材料所需的聚酰亚胺系统改性过程的研究
5. Additive Patterning of Gallium-based Liquid Metal Alloys at Room Temperature for Rapid Prototyping of Multilayered Microfluidics and 3D Printed Soft Electronics [D] . Parekh, Dishit Paresh 2018

机译：镓基液态金属合金在室温下的添加图案，用于多层微流控和3D打印软电子产品的快速原型制作
6. Expanding Puck and Schürmann Inter Fiber Fracture Criterion for Fiber Reinforced Thermoplastic 3D-Printed Composite Materials [O] . Thiago Assis Dutra, Rafael Thiago Luiz Ferreira, Hugo Borelli Resende, 2020

机译：用于纤维增强热塑性3D打印复合材料的Puck和Schürmann中间纤维断裂准则的扩展
7. Feasibility Study Into the Use of 3D Printed Materials in CubeSat Flight Missions [O] . Daniel Fluitt -1

机译：在CubeSat飞行任务中使用3D印刷材料的可行性研究

3D‐Printed Multilayered Reinforced Material System for Gas Supply in CubeSats and Small Satellites

著录项

引文网络

相似文献

相关主题

期刊订阅