首页> 外文OA文献 >Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer

【2h】

Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer

机译：模具温度和空白厚度对除去Al-Si涂层的硼钢板的激光焊接坯料的成形性的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
相似文献
相关主题

著录项

作者
M. S. Lee; J. H. Moon; C. G. Kang;
展开▼
作者单位

展开▼
年度 2014
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer [J] . Lee M. S., Moon J. H., Kang C. G. Advances in Mechanical Engineering . 2014,第Pta5期

机译：模具温度和坯料厚度对去除铝硅涂层的硼钢板激光焊接坯料成形性的影响
2. A study on mechanical properties of laser-welded blank of a boron sheet steel by laser ablation variable of Al-Si coating layer [J] . Jung-Hwan Moon, Pan-Ki Seo, Chung-Gil Kang International Journal of Precision Engineering and Manufacturing . 2013,第2期

机译：利用Al-Si涂层的激光烧蚀变量研究硼薄板激光焊接坯的力学性能
3. A Study on Mechanical Properties of Laser-Welded Blank of a Boron Sheet Steel by Laser Ablation Variable of Al-Si Coating Layer [J] . Jung-Hwan Moon, Pan-Ki Seo, Chung-Gil Kang International Journal of Precision Engineering and Manufacturing . 2013,第2期

机译：利用Al-Si涂层的激光烧蚀变量研究硼薄板激光焊接坯的力学性能
4. Formability Analysis of High-Strength Steel Laser-Welded Blanks [C] . Brian Breakiron, James R. Fekete SAE World Congress . 2006

机译：高强度钢激光焊接坯料的可成形性分析
5. Combined temperature and blank holder pressure control in forming of aluminum of tailor-welded blanks. [D] . Vaidya, Pushkar. 2006

机译：结合温度和坯料夹持器压力控制，以形成定制焊接坯料的铝。
6. Analysis of the Influence of Blanking Clearance on the Wear of the Punch the Change of the Burr Size and the Geometry of the Hook Blanked in the Hardened Steel Sheet [O] . Jacek Mucha, Jacek Tutak 2019

机译：冲裁间隙对冲孔磨损毛刺尺寸变化和淬硬钢板冲孔钩几何形状的影响分析
7. Evaluation of Mechanical Characteristic of Laser-Welded Blank of a Boron Steel by Using Laser Ablation of Al-Si Coating Layer [O] . J.H. Moon, M.S. Lee, C.G. Kang 2011

机译：用Al-Si涂层激光烧蚀评估硼钢激光焊接坯料的机械特性

Effect of the Die Temperature and Blank Thickness on the Formability of a Laser-Welded Blank of a Boron Steel Sheet with Removing Al-Si Coating Layer

著录项

相似文献

相关主题

期刊订阅