首页> 外文OA文献 >The influence of tool diameter on wear during milling of titanium alloy Ti6Al4V

【2h】

The influence of tool diameter on wear during milling of titanium alloy Ti6Al4V

机译：钛合金Ti6Al4V研磨工具直径对磨损的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Józef Kuczmaszewski; Kazimierz Zaleski; Jakub Matuszak; Tomasz Pałka; Rafał Garwacki;
展开▼
作者单位

展开▼
年度 2017
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V [J] . Zhu Zhaoju, Sun Jie, Li Jianfeng, The International Journal of Advanced Manufacturing Technology . 2016,第9a12期

机译：端面铣削钛合金Ti6Al4V中刀具磨损对切屑形态影响的研究
2. The effect of monolayer TiCN-, AlTiN-, TiAlN-and two layers TiCN plus TiN- and AlTiN plus TiN-coated cutting tools on tool wear, cutting force, surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy [J] . Kuram Emel Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture . 2018,第7期

机译：单层TICN - ，ALTIN，TiAln-and TiC的效果TiCn加锡和Altin加锡涂层切削工具对Ti6Al4V钛合金高速研磨过程中的工具磨损，切割力，表面粗糙度和芯片形态
3. Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review [J] . Wang Bing, Liu Zhanqiang The International Journal of Advanced Manufacturing Technology . 2018,第5a8期

机译：工具结构，工具材料和工具磨损对钛和镍合金转动和研磨机加工表面完整性的影响：综述
4. INVESTIGATION ON THE TOOL WEAR MODEL AND EQUIVALENT TOOL LIFE IN END MILLING TITANIUM ALLOY TI6AL4V [C] . Kai Guo, Bin Yang, Jie Sun, ASME international manufacturing science and engineering conference . 2018

机译：最终铣削钛合金TI6AL4V的刀具磨损模型和等效刀具寿命的研究
5. Tool life and flank wear modeling of physical vapour deposited titanium aluminum nitride/titanium nitride multilayer coated carbide inserts when end milling 4340 steel under dry and semi-dry cutting conditions [D] . Chakraborty, Pinaki 2007

机译：在干式和半干式切削条件下端铣4340钢时，物理气相沉积的氮化钛铝/氮化钛多层涂层硬质合金刀片的刀具寿命和侧面磨损模型
6. Investigation of Tool Wear and Chip Morphology in Dry Trochoidal Milling of Titanium Alloy Ti–6Al–4V [O] . Dongsheng Liu, Ying Zhang, Ming Luo, 2019

机译：钛合金Ti–6Al–4V干摆线铣削中刀具磨损和切屑形态的研究
7. Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling [O] . 2015

机译：铣削过程中切削速度和刀具磨损对钛合金Ti-1023表面完整性的影响

The influence of tool diameter on wear during milling of titanium alloy Ti6Al4V

著录项

引文网络

相似文献

相关主题

期刊订阅