首页> 外文OA文献 >Precious Nickel Recovery from Palm Oil Mill Fuel Ash Waste (NiPOMFAW) Using Acidic Leaching Extraction (ALE)
【2h】

Precious Nickel Recovery from Palm Oil Mill Fuel Ash Waste (NiPOMFAW) Using Acidic Leaching Extraction (ALE)

机译:使用酸性浸提(ALE)从棕榈油厂的燃料灰渣(NiPOMFAW)中回收镍

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This paper demonstrates precious recovery of nickel from physical pre-treated raw palm oil mill fuel ash waste (POMFAW). The acidic leaching extraction (ALE) using sulphuric and hydrochloric acids agents were carried out in a bath stirrer flask. Process parameter effects of acidudconcentration, solution pH and treatment time were investigated in the nickel recuperation. The highest nickel recovery (96.83%) was found by treatment time of 1 h, pH of 2.5 and hydrochloric acid concentration of 2.0 M. At the acids leaching higher than 2 M, the nickel recovery decreased. Results from acids leaching imply that nickel complex can be formed at substantial percentages within the acid concentration higher than 1 M. The hydrochloric acid provides impressive nickel compared sulphuric acid, and the POMFAW can be proposed as a substitute of non-renewableudsources derived nickel for a promising material and the used ALE can be considered as a beneficial technique.
机译:本文证明了从物理预处理的原始棕榈油厂燃料灰渣(POMFAW)中回收宝贵的镍。使用硫酸和盐酸试剂的酸性浸出萃取(ALE)在浴式搅拌烧瓶中进行。在镍回收过程中,考察了酸超浓度,溶液pH和处理时间等工艺参数的影响。处理时间为1 h,pH为2.5和盐酸浓度为2.0 M时,镍的最高回收率(96.83%)。当酸浸出率高于2 M时,镍的回收率下降。酸浸的结果表明,在高于1 M的酸浓度下,可以形成相当大的百分比的镍配合物。与硫酸相比,盐酸可提供令人印象深刻的镍,而POMFAW可以替代不可再生的来源的镍对于有前途的材料,使用过的ALE可被视为一种有益的技术。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号