This paper presents the potential of high free fatty acid (FFA) Malaysianudrubber seed oil (MRSO) as feedstock for biodiesel production. Precalcinatedudlimestone known as clinker was activated using either methanoludor sodium methoxide and transesterification was performed under reflux atudconstant stirring. Mineral composition of the catalyst was analysed usingudx-ray fluorescence (XRF) with in build x-ray diffraction (XRD) indicatesudabout 66% of CaO content. The rubber seed oil was obtained using bothudmicrowave and soxhlet extraction using hexane as solvent. FFA content and fatty acid methyl ester content were determined using gas chromatography mass spectrometry (GC-MS). The methanol activated limestone based catalyst derived from cement clinker showed an efficient conversion (up to 96.7%) of high FFA rubber seed oil to biodiesel, and the biodiesel yield was 75%. The yield of biodiesel improved significantly (up to 88%) when sodium methoxide loaded clinker was used. The results suggest that the sodium methoxide activated catalyst employed in this work was less likely to be negatively affected by moisture and free fatty acids as compared to the methanol activated catalyst. The biodiesel produced in this work is within the limits of specification described by ASTM D6751.
展开▼
