首页> 外文OA文献 >Thickness Effect on Microstructure, Strength, and Toughness of a Quenched and Tempered 178 mm Thickness Steel Plate

【2h】

Thickness Effect on Microstructure, Strength, and Toughness of a Quenched and Tempered 178 mm Thickness Steel Plate

机译：淬火和淬火178mm厚度钢板的微观结构，强度和韧性的厚度效应

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Qinghai Wang; Qibin Ye; Zhaodong Wang; Liye Kan; Hongtao Wang;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Thickness Dependence of Toughness in Ultra-Heavy Low-Alloyed Steel Plate after Quenching and Tempering [J] . Huibin Liu, Hanqian Zhang, Jinfu Li Metals . 2018,第8期

机译：超重低合金板淬火回火后韧度的厚度依赖性
2. Effect of two-step tempering treatment on microstructure and impact toughness of bainitic steel for heavy wall thickness reactor pressure vessels [J] . Xie Changsheng, Liu Zhengdong, Wang Xitao, Materials Characterization . 2020,第期

机译：两步回火处理对重型壁厚反应器压力容器壳体钢微观结构和冲击韧性的影响
3. Effect of tempering temperature, plate thickness and presence of holes on ballistic impact behavior and ASB formation of a high strength steel [J] . Bidyapati Mishra, P.K.Jena, B. Ramakrishna, International journal of impact engineering . 2012,第期

机译：回火温度，板厚和孔的存在对高强度钢弹道冲击行为和ASB形成的影响
4. Brittle Crack Arrest Toughness for Extremely Thick Steel Plates:Required Kca Value of Steel Plates with Thickness of 100 mm Used in Ultra-Large Container Ships [C] . Kazuyuki Matsumoto, Tsutomu Fukui, Shota Nanno, International ocean and polar engineering conference;International Society of Offshore and Polar Engineers . 2018

机译：极厚钢板的脆性裂纹止裂韧性：用于超大型集装箱船的厚度为100 mm的钢板所需的Kca值
5. Tempering Response of Mixed Martensitic/Bainitic Microstructures in Quench and Tempered Plate Steels [D] . Vieira, Igor. 2018

机译：混合马氏体/贝氏体微观结构在淬火和钢板钢中的回火响应
6. Microstructure Transformation on Pre-Quenched and Ultrafast-Tempered High-Strength Multiphase Steels [O] . Yonggang Zhao, Zijie Xiang, Yuanbiao Tan, 2019

机译：预淬和超快回火高强度多相钢的组织转变
7. Improvement of the Strength and Toughness of Steel Plates by Direct-quenching and Tempering [O] . Nozomi KOMATSUBARA, Seiichi WATANABE, Hiroo OHTANI 1983

机译：通过直接淬火和回火改善钢板的强度和韧性
8. Investigation of Mechanism of Failure of High-Strength Materials. Part II. The Effect of Thickness and Tempering Temperature on Fracture Appearance Transition Temperature and Critical Fracture Toughness of High Strength Sheet Steel [R] . Maynor, H. W., Blair, R. E. 1963

机译：高强度材料失效机理研究。第二部分。厚度和回火温度对高强度钢板断裂外观转变温度和临界断裂韧性的影响

Thickness Effect on Microstructure, Strength, and Toughness of a Quenched and Tempered 178 mm Thickness Steel Plate

著录项

引文网络

相似文献

相关主题

期刊订阅