首页> 外文OA文献 >The Influence of Reduction-Ratio in the Hot-Rolling on the Strength and Toughness of Quenched and Tempered Steel

【2h】

The Influence of Reduction-Ratio in the Hot-Rolling on the Strength and Toughness of Quenched and Tempered Steel

机译：降低比率在淬火和钢化钢的强度和韧性上的热轧中的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Seiichi WATANABE; Tatsuro KUNITAKE;
展开▼
作者单位

展开▼
年度 1975
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Influence of intercritical tempering temperature on impact toughness of a quenched and tempered medium-Mn steel: Intercritical tempering versus traditional tempering [J] . C. Sun, S.L. Liu, R.D.K. Misra, Materials Science and Engineering . 2018,第jana10期

机译：临界回火温度对调质中锰钢冲击韧性的影响：临界回火与传统回火
2. A novel large cross-section quenching and tempering mold steel matching excellent strength-hardness-toughness properties [J] . Hanghang Liu, Paixian Fu, Hongwei Liu, Materials Science and Engineering . 2018,第NOVa8期

机译：新型大截面淬火回火模具钢，具有出色的强度-硬度-韧性性能
3. Concurrent enhancement of ductility and toughness in an ultrahigh strength lean alloy steel treated by bainite-based quenching-partitioning-tempering process [J] . Guhui Gao, Baifeng An, Han Zhang, Materials Science and Engineering . 2017,第auga15期

机译：贝氏体基淬火-分区-回火工艺处理的超高强度贫合金钢的塑性和韧性的同时提高
4. The Effect of Tempering on Low-Temperature Toughness of the Direct Quenched High-Strength Offshore Steel [C] . Ta-Hung Tseng, Chieh Yu, Ren-Kae Shiue International Conference on Advanced Materials Research . 2017

机译：回火对直接淬火高强度海上钢材低温韧性的影响
5. The effect of increasing carbon level on titanium carbosulfides and their influence on toughness in ultrahigh-strength steels. [D] . Iorio, Luana Emiliana. 2000

机译：碳含量增加对碳硫化钛的影响及其对超高强度钢韧性的影响。
6. Hot-Rolling and a Subsequent Direct-Quenching Process Enable Superior High-Cycle Fatigue Resistance in Ultra-High Strength Low Alloy Steels [O] . Min-Seok Baek, Young-Kyun Kim, Tae-Won Park, 2020

机译：热轧和随后的直接淬火过程使超高强度低合金钢中的卓越的高循环疲劳性能实现
7. Influence of Ni and Mn on Toughness of Multi-Pass Weld Heat Affected Zone in Quenched and Tempered High Strength Steels [O] . Toshiei HASEGAWA, Toshiaki HAZE, Shuji AIHARA, 1994

机译：Ni和Mn对淬火和回火高强度钢中多通焊热影响区韧性的影响

The Influence of Reduction-Ratio in the Hot-Rolling on the Strength and Toughness of Quenched and Tempered Steel

著录项

引文网络

相似文献

相关主题

期刊订阅