首页> 外文OA文献 >Transition to Mach reflexion of shock waves in steady and pseudosteady flow with and without relaxation
【2h】

Transition to Mach reflexion of shock waves in steady and pseudosteady flow with and without relaxation

机译:在有或没有松弛的情况下,在稳定和拟稳态流中冲击波向马赫反射的过渡

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Experiments were conducted in the free-piston shock tube and shock tunnel with dissociating nitrogen and carbon dioxide, ionizing argon and frozen argon to measure the transition condition in pseudosteady and steady flow. The transition condition in the steady flow, in which the wall was eliminated by symmetry, agrees with the calculated von Neumann condition. In the real gases this calculation assumed thermo-dynamic equilibrium after the reflected shock. In the pseudosteady flow of reflexion from a wedge the measured transition angle lies on the Mach-reflexion side of the calculated detachment condition by an amount which may be explained in terms of the displacement effect of the boundary layer on the wedge surface. A single criterion based on the availability of a length scale at the reflexion point explains the difference between the pseudosteady and steady flow transition condition and predicts a hysteresis effect in the transition angle when the shock angle is varied during steady flow. No significant effects on the transition condition due to finite relaxation length could be detected. However, new experiments in which interesting relaxation effects should be evident are suggested.
机译:在自由活塞式激波管和激波隧道中,通过离解氮气和二氧化碳,电离氩气和冷冻氩气进行实验,以测量拟稳态和稳态流动的过渡条件。通过对称消除壁的稳态流动过渡条件与计算的冯·诺依曼条件一致。在实际气体中,此计算假定反射冲击后为热力学平衡。在来自楔形的伪稳态反射流中,测得的过渡角位于计算的分离条件的马赫反射侧,其量可以用边界层在楔形表面上的位移效应来解释。基于在反射点处的长度刻度的可用性的单个准则解释了伪稳态和稳态流动过渡条件之间的差异,并预测了在稳态流动期间冲击角变化时过渡角度的滞后效应。由于有限的弛豫长度,对过渡条件没有明显影响。但是,提出了新的实验,其中有趣的松弛效果应该很明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号