首页> 外文OA文献 >Compact and broadband polarization beam splitter based on a silicon nitride augmented low-index guiding structure
【2h】

Compact and broadband polarization beam splitter based on a silicon nitride augmented low-index guiding structure

机译:基于氮化硅增强低折射率导引结构的紧凑型宽带偏振分束器

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

We propose a compact polarization beam splitter (PBS) based on a silicon nitride enhanced silicon-on-insulator platform using an augmented low-index guiding (ALIG) waveguide structure. In the ALIG structure, the TM mode is mostly confined in the low-index silicon nitride, while the TE mode is confined in the high-index silicon. Since the two modes are confined in two separate layers, their properties can be controlled independently. The PBS is formed using an asymmetric multimode interference (MMI) section. The TM mode is directed to an output port by the ALIG waveguide, while the TE mode is coupled to the other output port via the multimode interferometer. Such a PBS has a very small footprint, low insertion loss, high polarization extinction ratio, and broadband response.
机译:我们提出了一种基于氮化硅增强绝缘体上硅平台的紧凑型偏振分束器(PBS),该平台使用了增强的低折射率波导(ALIG)波导结构。在ALIG结构中,TM模式主要限于低折射率氮化硅,而TE模式则限于高折射率硅。由于两种模式都限制在两个单独的层中,因此可以独立控制它们的属性。 PBS使用非对称多模干扰(MMI)部分形成。 TM模式通过ALIG波导定向到输出端口,而TE模式通过多模干涉仪耦合到另一个输出端口。这样的PBS具有非常小的占用面积,低的插入损耗,高的偏振消光比和宽带响应。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号