Enhanced Stability and Activity for Water Oxidation in Alkaline Media with Bismuth Vanadate Photoelectrodes Modified with a Cobalt Oxide Catalytic Layer Produced by Atomic Layer Deposition

摘要

Atomic-layer deposition (ALD) of thin layers of cobalt oxide on n-type BiVO_4 produced photoanodes capable of water oxidation with essentially 100% faradaic efficiency in alkaline, pH = 13 electrolytes. By contrast, under the same operating conditions, BiVO_4 photoanodes without the Co oxide catalytic layer exhibited lower faradaic yields, of ca. 70%, for O_2 evolution and were unstable, becoming rapidly photopassivated. High numbers (>25) of ALD cycles of Co oxide deposition gave electrodes that displayed poor photoelectrochemical behavior, but 15–20 ALD cycles produced Co oxide overlayers ~1 nm in thickness, with the resulting photoelectrodes exhibiting a stable photocurrent density of 1.49 mA cm^(–2) at the oxygen-evolution potential and an open-circuit potential of 0.404 V versus the reversible hydrogen electrode, under 100 mW cm^(–2) of simulated air mass 1.5 illumination.