首页> 外文OA文献 >X-ray CT-Derived Soil Characteristics Explain Varying Air, Water, and Solute Transport Properties across a Loamy Field
【2h】

X-ray CT-Derived Soil Characteristics Explain Varying Air, Water, and Solute Transport Properties across a Loamy Field

机译:X射线CT衍生的土壤特性解释在植物领域的不同空气,水和溶质运输性能

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The characterization of soil pore space geometry is important for explaining fluxes of air, water, and solutes through soil and understanding soil hydrogeochemical functions. X-ray computed tomography (CT) can be applied for this characterization, and in this study CT-derived parameters were used to explain water, air, and solute transport through soil. Forty-five soil columns (20 by 20 cm) were collected from an agricultural field in Estrup, Denmark, and subsequently scanned using a medical CT scanner. Nonreactive tracer leaching experiments were performed in the laboratory along with measurements of air permeability (Ka) and saturated hydraulic conductivity (Ksat). The CT number of the matrix (CTmatrix), which represents the moist bulk density of the soil matrix, was obtained from the CT scans as the average CT number of the voxels in the grayscale image excluding macropores and stones. The CTmatrix showed the best relationships with the solute transport characteristics, especially the time by which 5% of the applied mass of tritium was leached, known as the 5% arrival time (t0.05). The CT-derived macroporosity (pores 1.2 mm) was correlated with Ka and log10(Ksat). The correlation improved when the limiting macroporosity (the minimum macroporosity for every 0.6-mm layer along the soil column) was used, suggesting that soil layers with the narrowest macropore section restricted the flow through the whole soil column. Water, air, and solute transport were related with the CT-derived parameters by using a best subsets regression analysis. The regression coefficients improved using CTmatrix, limiting macroporosity, and genus density, while the best model for t0.05 used CTmatrix only. The scanning resolution and the time for soil structure development after mechanical activities could be factors that increased the uncertainty of the relationships. Nevertheless, the results confirmed the potential of X-ray CT visualization techniques for estimating fluxes through soil at the field scale.
机译:土壤孔隙空间几何形状的表征对于通过土壤来解释空气,水和溶质的助焊剂,并且了解土壤水文地理学功能。 X射线计算断层扫描(CT)可用于该表征,并且在该研究中,CT衍生的参数用于解释水,空气和通过土壤溶质。从丹麦的雌仓,农业领域收集四十五个土柱(20厘米),随后使用医疗CT扫描仪扫描。在实验室中进行非反应性示踪剂浸出实验以及透气性(Ka)和饱和液压导电性(Ksat)的测量。代表土壤基质的湿堆积密度的基质(CTMATrix)的CT数是从CT扫描获得作为除了宏观和石头中的灰度图像中的体素的平均CT数。 CTMATRIX显示出与溶质转运特性的最佳关系,特别是氚浸出5%的氚的5%的时间,称为5%到达时间(T0.05)。 CT衍生的大孔(孔> 1.2mm)与KA和LOG10(KSAT)相关。当使用限制宏观度(沿着土柱的每层0.6毫米层的最小宏级)时,相关性改善,表明具有最窄的大孔部分的土壤层限制了通过整个土壤柱的流量。通过使用最好的子集回归分析,水,空气和溶质转运与CT衍生参数有关。回归系数使用CTMATrix,限制宏观度和属密度改善,而T0.05的最佳模型仅使用CTMATrix。机械活动后的扫描分辨率和土壤结构发展的时间可能是增加关系不确定性的因素。然而,结果证实了X射线CT可视化技术的潜力,用于在现场规模处通过土壤估计助熔剂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号