首页> 外文OA文献 >Analysis of machining-induced residual stresses of milled aluminum workpieces, their repeatability, and their resulting distortion

【2h】

Analysis of machining-induced residual stresses of milled aluminum workpieces, their repeatability, and their resulting distortion

机译：铣削铝工件的加工诱导的残余应力分析，其重复性及其失真

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Daniel Weber; Benjamin Kirsch; Christopher R. Chighizola; Christopher R. D’Elia; Barbara S. Linke; Michael R. Hill; Jan C. Aurich;
展开▼
作者单位

展开▼
年度 2021
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Finite Element Simulation Combination to Predict the Distortion of Thin Walled Milled Aluminum Workpieces as a Result of Machining Induced Residual Stresses [J] . Weber Daniel, Kirsch Benjamin, Chighizola Christopher R., OASIcs : OpenAccess Series in Informatics . 2021,第a期

机译：有限元模拟组合以预测加工诱导残余应力的薄壁研磨铝工件的变形
2. Investigation on the scale effects of initial bulk and machining induced residual stresses of thin walled milled monolithic aluminum workpieces on part distortions: experiments and finite element prediction model [J] . D. Weber, B. Kirsch, C.R. Chighizola, Procedia CIRP . 2021,第a期

机译：初始散装和加工诱导薄壁碾磨整体铝工件的剩余耐盐应力的规模效应研究：实验与有限元预测模型
3. Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivity [J] . M. Nasr, E.-G. Ng, M. Elbestawi Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture . 2007,第b9期

机译：工件热性能对加工引起的残余应力的影响-热软化和电导率
4. Processing parameters optimization on control of residual stresses and distortion during high-speed milling of thin-walled workpiece [C] . Jiang Xiaohui, Li Beizhi, Zuo Xiaoyan International Conference on Materials Science and Nanotechnology . 2013

机译：处理参数优化薄壁工件高速铣削剩余应力和变形的优化
5. Analysis of Low Transformation Temperature Welding (LTTW) consumables -Distortion control and evolution of residual stresses. [D] . Thomas, Sindhu. 2013

机译：低相变温度焊接（LTTW）耗材分析-变形控制和残余应力的演变。
6. Influence of the Cutting Strategy on the Temperature and Surface Flatness of the Workpiece in Face Milling [O] . Lukasz Nowakowski, Michal Skrzyniarz, Slawomir Blasiak, 2020

机译：切割策略对面部铣削工件温度和表面平坦度的影响
7. Effect of Constitutive Modeling During Finite Element Analysis of Machining-induced Residual Stresses in Ti6Al4V [O] . Styger Gary, Laubscher Rudolph F., Oosthuizen Gert A. 2014

机译：本构模型在机加工Ti6Al4V残余应力有限元分析中的作用
8. Aluminum alloys for satellite boxes : engineering guidelines for obtaining adequate strength while minimizing residual stresses and machining distortion. [R] . 2007

机译：卫星箱用铝合金：获得足够强度同时最大限度地减少残余应力和加工变形的工程指南。

Analysis of machining-induced residual stresses of milled aluminum workpieces, their repeatability, and their resulting distortion

著录项

引文网络

相似文献

相关主题

期刊订阅