首页> 外文OA文献 >ANALYSIS OF THE STEEL BRACE MEMBER SUBJECTED TO REPEATED PRESCRIBED AXIAL DISPLACEMENT : (Part 1) Formulation of the elasto-plastic finite deformation analysis method considering the influence of the loading history

【2h】

ANALYSIS OF THE STEEL BRACE MEMBER SUBJECTED TO REPEATED PRESCRIBED AXIAL DISPLACEMENT : (Part 1) Formulation of the elasto-plastic finite deformation analysis method considering the influence of the loading history

机译：经过重复规定的轴向位移的钢支撑构件的分析：（第1部分）鉴定载荷历史影响的弹塑性有限变形分析方法的配制

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Yoshio TOMONAGA; Kazuo KONDOH;
展开▼
作者单位

展开▼
年度 2003
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. The analysis of elasto-plastic stresses in the composite laminate with a circular hole subjected to in-plane loads by means of finite element method [J] . Ozbay M, Ozer D Journal of Reinforced Plastics and Composites . 2005,第6期

机译：平面孔内圆孔复合层合板弹塑性应力的有限元分析
2. A comparative study of displacement and mixed-based corotational finite element formulations for elasto-plastic three-dimensional beam analysis [J] . Rabe Alsafadie, Mohammed Hjiaj, Hugues Somja, Engineering Computations . 2011,第7a8期

机译：弹塑性三维梁分析的位移和基于混合的有限元有限元公式的比较研究
3. Elasto-plastic vibrational analysis of tapered bars under uniform axial loading considering shear deformation and rotary inertia [J] . Canales F. G., Mantari J. L. International journal of non-linear mechanics . 2017,第octa期

机译：考虑剪力变形和转动惯量的均匀轴向载荷下锥形杆的弹塑性振动分析
4. Load/Displacement and Energy Dissipation Performances of Aluminum and Magnesium Extrusions Subjected to Quasi-Static and Dynamic Loading under Axial Crush and Cutting Deformation Modes [C] . Ryan Smith, Philipp Strausburger, William Atlenhof, Light Metals Symposium . 2015

机译：铝和镁挤出的负载/位移和能量耗散性能在轴压和切割变形模式下进行准静态和动态载荷
5. EXPERIMENTAL ANALYSIS OF DRILLED SHAFT FOUNDATIONS SUBJECTED TO REPEATED AXIAL LOADS UNDER DRAINED CONDITIONS. (VOLUMES I AND II) [D] . TURNER, JOHN PATRICK. 1986

机译：排水条件下轴心反复荷载作用下的钻孔轴基础试验分析。（第一和第二卷）
6. Finite Element Analysis of Changes in Tensile Strain by Airsoft Gun Impact on Eye and Deformation Rate in Eyes of Various Axial Lengths [O] . Rie Takahashi, Kanno Okamura, Tomoko Tsukahara-Kawamura, 2020

机译：气枪枪对各种轴向长度眼中眼睛抗眼睛和变形速率的抗拉菌株变化的有限元分析
7. A STUDY ON CONSTITUTIVE THEORY IN ELASTO-PLASTIC ANALYSIS USING ADDITIONAL LOAD : ANALYSIS OF CONCRETE FILLED-STEEL TUBE UNDER AXIAL COMPRESSION IN FINITE ELEMENT METHOD [O] . Junichiro ISHIDA 1994

机译：用额外载荷的弹塑性分析本构关学理论研究：有限元法下轴压下轴压制下的混凝土填充 - 钢管分析
8. Application of Finite Element Methods with Cyclic Elasto-Plastic Strain Analysis to Low Cycle Fatigue Analysis of Engine Components, [R] . Swansson, N. S. 1986

机译：循环弹塑性应变分析有限元法在发动机部件低周疲劳分析中的应用，

ANALYSIS OF THE STEEL BRACE MEMBER SUBJECTED TO REPEATED PRESCRIBED AXIAL DISPLACEMENT : (Part 1) Formulation of the elasto-plastic finite deformation analysis method considering the influence of the loading history

著录项

引文网络

相似文献

相关主题

期刊订阅