首页> 外文OA文献 >The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid
【2h】

The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid

机译:Zr46.75Ti8.25Cu7.5Ni10Be27.5大块金属玻璃成形合金在过冷液体中的粘度

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid was measured using parallel plate rheometry. The measurements were carried out with different heating rates between 0.0167 and 1.167 K/s as well as isothermally. Because of the high thermal stability above the glass transition of this bulk metallic glass former with respect to crystallization, it was possible to measure viscosities in the range from 1010 to 106 poise. This region of viscosities has not been previously measured for supercooled metallic melts. Our measurements suggest that the viscosity of the supercooled liquid of this bulk glass former exhibits a small Vogel–Fulcher temperature relative to the glass transition temperature, similar to silicate glasses.
机译:使用平行板流变仪测量过冷液体中Zr46.75Ti8.25Cu7.5Ni10Be27.5块状金属玻璃形成合金的粘度。在0.0167和1.167 K / s之间的不同加热速率以及等温下进行测量。由于该大块金属玻璃成型体在玻璃化转变温度以上具有较高的热稳定性,因此可以测量1010至106泊的粘度。以前未对过冷的金属熔体测量该粘度范围。我们的测量结果表明,这种散装玻璃成形器的过冷液体的粘度相对于玻璃转变温度显示出较小的Vogel–Fulcher温度,类似于硅酸盐玻璃。

著录项

  • 作者单位
  • 年度 1995
  • 总页数
  • 原文格式 PDF
  • 正文语种 {"code":"en","name":"English","id":9}
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号