首页> 外文OA文献 >Thermographic method for fatigue limit determination at cyclic loading - measurement procedure overview and validation

【2h】

Thermographic method for fatigue limit determination at cyclic loading - measurement procedure overview and validation

机译：循环加载过程中疲劳极限测定的热敏方法 - 测量过程概述和验证

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Jiří TESAŘ; Michal ŠVANTNER; Jiří SKÁLA; Petra HONNEROVÁ; Matyáš NOVÁK;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Comparison of Analysis Methods of Data from Thermographic Measurements of Al 2024 Fatigue Limit For R=0.1 [J] . Stanislav SEITL, Jan KLUSáK, Pelayo FERNANDEZ, Transactions of the VSB - Technical University of Ostrava: Mechanical Series . 2013,第2期

机译：R = 0.1的Al 2024疲劳极限热成像测量数据分析方法的比较
2. Determination of fatigue limit by Locati method using S-N curve determined by means of thermographic method [J] . LIPSKI Adam Diffusion and Defect Data. Solid State Data, Part B. Solid State Phenomena . 2015,第Null期

机译：用热成像法测定的S-N曲线通过Locati法确定疲劳极限
3. Accelerated Determination of Fatigue Limit and S-N Curve by Means of Thermographic Method for X5CrNi18-10 Steel [J] . Adam Lipski Acta Mechanica et Automatica . 2016,第1期

机译：X5CrNi18-10钢的热成像法快速测定疲劳极限和S-N曲线
4. THERMOGRAPHIC METHOD FOR FATIGUE LIMIT DETERMINATION AT CYCLIC LOADING -MEASUREMENT PROCEDURE OVERVIEW AND VALIDATION [C] . Jiri TESAR, Michal SVANTNER, Jiri SKALA International Conference on Metallurgy and Materials . 2020

机译：循环加载过程概述和验证的疲劳极限测定的热敏分析方法
5. Investigation of Cyclic Deformation and Fatigue of Polycrystalline Cu under Pure Compression Cyclic Loading Conditions. [D] . Hsu, Tzu-Yin Jean. 2015

机译：纯压缩循环载荷条件下多晶铜的循环变形和疲劳研究。
6. Numerical Study on the Fatigue Limit of Metallic Glasses under Cyclic Tension-Compression Loading [O] . Jinfeng Yan, Wenjun Meng, Zhi Chen, 2020

机译：循环拉伸压缩载荷下金属玻璃疲劳极限的数值研究
7. Determination of the S-N curve and the fatigue limit by means of the thermographic method for ductile cast iron [O] . Adam Lipski 2018

机译：借助于球墨铸铁的热成像方法测定S-N曲线和疲劳极限
8. Fatigue Crack and Porosity Measurement in Composite Materials by Thermographic and Ultrasonic Methods [R] . Walker, James L., Russell, Samuel S., Suits, Michael W., 2003

机译：热成像和超声波法测定复合材料的疲劳裂纹和孔隙率

Thermographic method for fatigue limit determination at cyclic loading - measurement procedure overview and validation

著录项

引文网络

相似文献

相关主题

期刊订阅