首页> 外文OA文献 >Sludge Phases as Cause of Higher Wear of Cutting Tools during Machining of Secondary AlSi12Cu1 Castings

【2h】

Sludge Phases as Cause of Higher Wear of Cutting Tools during Machining of Secondary AlSi12Cu1 Castings

机译：污泥阶段作为切割工具较高磨损过程的原因在加工过程中的辅助工具

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Eva Tillová; Mária Chalupová; Lenka Kuchariková; Ivana Švecová; Juraj Belan;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Cutting tool wear in the machining of hardened steels part II: cubic boron nitride cutting tool wear [J] . J. Barry, G. Byrne Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 2001,第2期

机译：淬硬钢加工中的切削刀具磨损第二部分：立方氮化硼切削刀具的磨损
2. Cutting tool wear in the machining of hardened steels part I: alumina/TiC cutting tool wear [J] . J. Barry, G. Byrne Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 2001,第2期

机译：淬硬钢加工中的切削刀具磨损第一部分：氧化铝/ TiC切削刀具磨损
3. Influence of hexagonal phase transformation in laser prepared PcBN cutting tools on tool wear in machining of Inconel 718 [J] . B. Breidenstein, T. Grove, A. Krodel Metal Powder Report . 2019,第5期

机译：六边形相变对Inconel 718加工加工工具磨损工具磨损的影响
4. AN ANALYTICAL SOLUTION TO CUTTING FORCES AND CHIP THICKNESS IN MACHINING WITH A GROOVED TOOL INCLUDING THE TOOL-CHIP CONTACT ON THE TOOL SECONDARY RAKE FACE [C] . N. Fang, C. Wood, W. Wang Conference on Transactions of the North American Manufacturing Research Institution of SME May 20-23, 2003 Hamilton, Ontario, Canada . 2003

机译：槽形刀具加工时切削力和切屑厚度的解析解决方案，其中包括刀具二次耙面上的刀具-切屑接触
5. Prediction of the wear and evolution of cutting tools in a carbide / titanium-aluminum-vanadium machining tribosystem by volumetric tool wear characterization and modeling. [D] . Kuttolamadom, Mathew Abraham. 2012

机译：通过体积刀具磨损特征和建模，预测硬质合金/钛-铝-钒加工摩擦系统中切削刀具的磨损和演变。
6. Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear [O] . Farhana Yasmin, Khairul Fikri Tamrin, Nadeem Ahmed Sheikh, 2021

机译：激光辅助高速加工316不锈钢：水溶性Sago淀粉基切削液对表面粗糙度和工具磨损的影响
7. End Milling of Free-machining Steel for High Speed Machining: Tool Wear and Cutting Temperature in Cutting BN Added Steels [O] . 田中, 隆太郎, 山根, 八洲男, 岡田, 将人, 2007

机译：高速加工用易切削钢的端铣：切削BN添加钢的刀具磨损和切削温度

Sludge Phases as Cause of Higher Wear of Cutting Tools during Machining of Secondary AlSi12Cu1 Castings

著录项

引文网络

相似文献

相关主题

期刊订阅