首页> 外文OA文献 >The Influence of Temperature and Stress Intensity Factor upon the Striation Spacing and Fatigue Crack Propagation Rate of Aluminum Alloy

【2h】

The Influence of Temperature and Stress Intensity Factor upon the Striation Spacing and Fatigue Crack Propagation Rate of Aluminum Alloy

机译：温度和应力强度因子对铝合金突变间距和疲劳裂纹传播速率的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
相似文献
相关主题

著录项

作者
Takeo Yokobori; Tamio Aizawa;
展开▼
作者单位

展开▼
年度 1974
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. 焊接参数对搅拌摩擦焊2024-T351铝合金焊接接头断裂韧性和疲劳裂纹生长速率的影响 [J] . Danial GHAHREMANI MOGHADAM, Khalil FARHANGDOOST 中国有色金属学报：英文版 . 2016,第010期
2. On the effect of stress intensity factor in evaluating the fatigue crack growth rate of aluminum alloy under the influence of compressive stress cycles [J] . Mohammad Iranpour, Farid Taheri International Journal of Fatigue . 2012,第期

机译：应力强度因子对压缩应力循环影响下铝合金疲劳裂纹扩展速率的影响
3. Finite Element Analysis of the Influence of Crack Tip Stress Distribution on Fatigue Crack Propagation Rate of 5XXX Aluminum Alloy [J] . Jiaju Liu, Hui Huang, Ran Liu, Materials science forum . 2015,第期

机译：裂纹尖端应力分布对5XXX铝合金疲劳裂纹扩展速率影响的有限元分析
4. Near-Threshold Fatigue Crack Growth Behavior of 2195 Aluminum-Lithium-Alloy-Prediction of Crack Propagation Direction and Influence of Stress Ratio [J] . Chen D.L., Chaturvedl C. Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science . 2000,第6期

机译：2195铝锂合金的近阈疲劳裂纹扩展行为-裂纹扩展方向及应力比的影响预测
5. Some Considerations about the Influence of the Stress Intensity Factors K_(Imin), K_(IImax) and K_(eq) in Fatigue Crack Propagation in the Substrate of the Gear Teeth [C] . POPA Claudiu Ovidiu, HARAGAS Simion International Conference of Mechanical Engineering . 2016

机译：关于压力强度因子K_（IMIN），K_（IIMAX）和K_（等式）在齿轮齿基板中疲劳裂纹传播影响的一些考虑因素
6. NEAR THRESHOLD FATIGUE CRACK PROPAGATION BEHAVIOR IN IRON AND ALUMINUM - 3 PERCENT MAGNESIUM ALLOY (CRACK CLOSURE). [D] . PARK, DONG-HWAN. 1984

机译：铁和铝的近阈值疲劳裂纹扩展行为-镁合金含量为3％（裂纹关闭）。
7. Effect of Specimen Thickness and Stress Intensity Factor Range on Plasticity-Induced Fatigue Crack Closure in A7075-T6 Alloy [O] . Kenichi Masuda, Sotomi Ishihara, Noriyasu Oguma 2021

机译：试样厚度和应力强度因子范围对A7075-T6合金塑性诱导疲劳裂纹闭合的影响
8. The Influence of Temperature and Stress Intensity Factor upon the Fatigue Crack Propagation Rate and the Striation Spacing of 304 Stainless Steel [O] . Takeo Yokobori, Tamio Aizawa 1975

机译：温度和应力强度因子对304不锈钢疲劳裂纹传播速率的影响及其抗条间距
9. Corrosion Fatigue Crack Propagation in Aluminum Alloys. Part I. Effect of Cyclic Stress Wave Form on Corrosion Fatigue Crack Propagation in Al-Zn-Mg Alloys. Part II. Mechanisms of Corrosion Fatigue Crack Propagation in Al-Zn-Mg Alloys [R] . Selines, R. J., Stoltz, R. E., Pelloux, R. M. 1972

机译：铝合金腐蚀疲劳裂纹扩展。第一部分循环应力波形对al-Zn-mg合金腐蚀疲劳裂纹扩展的影响。第二部分。 al-Zn-mg合金腐蚀疲劳裂纹扩展机理

The Influence of Temperature and Stress Intensity Factor upon the Striation Spacing and Fatigue Crack Propagation Rate of Aluminum Alloy

著录项

相似文献

相关主题

期刊订阅