Bioinspiration: Applying Mechanical Design to Experimental Biology

机译：生物悬浮阀：将机械设计应用于实验生物学

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
B. E. Flammang; M. E. Porter;
展开▼
作者单位

展开▼
年度 2011
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Bioinspiration: Applying Mechanical Design to Experimental Biology [J] . Flammang Brooke E., Porter Marianne E. . Integrative and Comparative Biology . 2011,第1期

机译：生物灵感：将机械设计应用于实验生物学
2. Bioinspiration: Applying Mechanical Design to Experimental Biology [J] . Marianne E. Porter Integrative and Comparative Biology . 2011,第1期

机译：生物灵感：将机械设计应用于实验生物学
3. Bioinspiration From Flexible Propulsors: Organismal Design, Mechanical Properties, Kinematics and Neurobiology of Pectoral Fins in Labrid Fishes [J] . Westneat Mark W., Aiello Brett R., Olsen Aaron M., Marine Technology Society journal . 2017,第5期

机译：挠性推进器的生物启发：Labrid鱼胸鳍的生物设计，力学特性，运动学和神经生物学
4. Mechanical and thermo-mechanical stress considerations in applying 3D ICs to a design [C] . Lan Jia-Shen, Wu Mei-Ling IEEE Electronic Components and Technology Conference . 2014

机译：将3D IC应用于设计时的机械应力和热机械应力注意事项
5. THE ABILITY TO RECOGNIZE AND APPLY SCIENTIFIC PRINCIPLES IN NEW SITUATIONS; AN EXPERIMENTAL INVESTIGATION IN HIGH SCHOOL BIOLOGY AND CHEMISTRY. [D] . OWENS, JOHN HAROLD. 1949

机译：在新情况下能够识别和应用科学原理的能力；高中生物学与化学实验研究。
6. Synthetic Biology: Applying Engineering to Life Sciences to Develop Rationally Designed Biological Parts Devices and Systems [O] . Ianis G. Matsoukas 2013

机译：合成生物学：将工程学应用到生命科学中以开发合理设计的生物零件设备和系统
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Experimental Observations for Determining the Maximum Torque Values to Apply to Composite Components Mechanically Joined With Fasteners (MSFC Center Director's Discretionary Fund Final Report, Proj. 03-13 [R] . Thomas, F. P. 2006

机译：确定应用于机械加入紧固件的复合材料部件的最大扭矩值的实验观察（msFC中心主任的全权委托基金最终报告，项目03-13

Bioinspiration: Applying Mechanical Design to Experimental Biology

著录项

引文网络

相似文献

相关主题

期刊订阅