首页> 外文OA文献 >Effect of Process Parameters on Short Fiber Orientation along the Melt Flow Direction in Water-Assisted Injection Molded Part

【2h】

Effect of Process Parameters on Short Fiber Orientation along the Melt Flow Direction in Water-Assisted Injection Molded Part

机译：工艺参数对水辅注射成型部分熔体流动方向短纤维取向的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Haiying Zhou; Hesheng Liu; Qingsong Jiang; Tangqing Kuang; Zhixin Chen; Weiping Li;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effect of Process Parameters on Short Fiber Orientation along the Melt Flow Direction in Water-Assisted Injection Molded Part [J] . Haiying Zhou, Hesheng Liu, Qingsong Jiang, Advances in materials science and engineering . 2019,第9期

机译：工艺参数对水辅注射成型部分熔体流动方向短纤维取向的影响
2. Formation mechanism of high-pressure water penetration induced fiber orientation in overflow water-assisted injection molded short glass fiber-reinforced polypropylene [J] . Zhang Wei, Liu He-sheng, Jiang Qing-song, Journal of Applied Polymer Science . 2021,第37a38期

机译：高压水渗透诱导纤维取向在溢流水辅注塑中纤维取向的形成机理 - 增强聚丙烯
3. The Influence of Melt and Process Parameters on the Quality and Occurrence of Part Defects in Water-assisted Injection Molded Tubes [J] . S. Sannen, J. De Keyzer, P. Van Puyvelde International Polymer Processing: The Journal of the Polymer Processing Society . 2011,第5期

机译：熔体和工艺参数对水辅助注塑管中零件缺陷的质量和发生的影响
4. EFFECTS OF PROCESSING PARAMETERS ON EXPERIMENTAL FIBER ORIENTATION OF GLASS FIBER-REINFORCED INJECTION MOLDED COMPOSITES [C] . Rebecca A. Minnick, Donald G. Baird Technical Conference of the Society of Plastics Engineers . 2015

机译：加工参数对玻璃纤维增强注塑复合材料实验纤维取向的影响
5. Optimizing flow of plastic PBT with 45% glass and mineral fiber reinforcement in an injection over mold process using Taguchi, CPK and mold flow simulation software approaches [D] . Sanchez Urbina, Israel 2009

机译：使用Taguchi，CPK和模具流动模拟软件方法，在注模过程中使用45％的玻璃纤维和矿物纤维增强来优化塑料PBT的流动
6. Effects of Heating and Cooling of Injection Mold Cavity Surface and Melt Flow Control on Properties of Carbon Fiber Reinforced Semi-Aromatic Polyamide Molded Products [O] . Yasuhiko Murata, Ryota Kanno 2021

机译：注塑模腔表面加热和冷却的影响及熔体流动控制对碳纤维增强半芳族聚酰胺模塑产品的性能
7. Simulation and Optimization of Short Fiber Circumferential Orientation in Short-Fiber-Reinforced Composites Overflow Water-Assisted Injection Molded Tube [O] . Haiying Zhou, Hesheng Liu, Tangqing Kuang, 2019

机译：短纤维增强复合材料溢流水辅注塑管中短纤维圆周取向的仿真与优化
8. Effect of Melt Flow Index on the Impact Resistance, Dimensional Variation, andMechanical Properties of Injection Molded Polycarbonate [R] . Huelsman, M. A., Frank, G. J., Roach, K. P., 1994

机译：熔体流动指数对注射成型聚碳酸酯抗冲击性，尺寸变化和力学性能的影响

Effect of Process Parameters on Short Fiber Orientation along the Melt Flow Direction in Water-Assisted Injection Molded Part

著录项

引文网络

相似文献

相关主题

期刊订阅