首页> 外文OA文献 >The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel

【2h】

The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel

机译：Cu含量对耐热熔盐钢高温腐蚀行为的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Hong Li; Hui Zhang; Chengzhi Zhao; Hexin Zhang; Qiang Wang;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. A Study on the Corrosion Behavior of Stainless Steel and Heat-Resistant Alloy in Molten Salts of LiCl and LiCl-Li_2O [J] . Cho S.H., Zhang J.S. Journal of Korean Institute of Metal and Materials . 2000,第5期

机译：不锈钢及耐热合金在LiCl和LiCl-Li_2O熔盐中的腐蚀行为研究
2. Study on the high-temperature corrosion behavior of superheater steels of biomass-fired boiler in molten alkali salts’ mixtures: [J] . Jianjun He, Weizhou Xiong, Wei Zhang, Advances in Mechanical Engineering . 2016,第11期

机译：生物质燃料锅炉过热器钢在熔融碱金属盐混合物中的高温腐蚀行为研究：
3. EIS study of oxidation heat-treatment effects on corrosion behavior of Ni10Cu11Fe6Al metallic inert anode inside molten calcium chloride salt [J] . Alzamani Mehdi, Jafarzadeh Kourosh, Fattah-Alhosseini Arash Materials and Corrosion . 2019,第4期

机译：EIS研究氧化热处理对Ni10Cu11Fe6Al金属惰性阳极内熔融氯化钙盐的腐蚀行为的研究
4. Effect of chloride contents on the corrosion behavior of ferritic and austenitic steels in molten solar salts [C] . Ali Soleimani Dorcheh, Mathias C. Galetz, Rick. N. Durham Corrosion conference and expo . 2016

机译：氯化物含量对熔融铁盐中铁素体和奥氏体钢腐蚀行为的影响
5. The Influence of Manganese Content and Temperature on the Relative FCC/HCP Phase Stability and Strain-Hardening Behavior of High-Manganese TRIP/TWIP Steels. [D] . Pierce, Dean Thomas. 2014

机译：锰含量和温度对高锰TRIP / TWIP钢的相对FCC / HCP相稳定性和应变强化行为的影响。
6. Effects of Ti and Cu Addition on Inclusion Modification and Corrosion Behavior in Simulated Coarse-Grained Heat-Affected Zone of Low-Alloy Steels [O] . Yuhang Wang, Xian Zhang, Wenzhui Wei, 2021

机译：Ti和Cu添加对低合金钢模拟粗粒热影响区的包合物改性和腐蚀行为的影响
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel

著录项

引文网络

相似文献

相关主题

期刊订阅