首页> 外文OA文献 >Effect of Mezzo-Heterogeneous Microstructure and Rolling on the Rolling Contact Fatigue Strength of Sintered High Ni Alloy Steels

【2h】

Effect of Mezzo-Heterogeneous Microstructure and Rolling on the Rolling Contact Fatigue Strength of Sintered High Ni Alloy Steels

机译：夹竹节异质微结构对烧结高Ni合金钢滚动接触疲劳强度的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
相似文献
相关主题

著录项

作者
Kentaro Kudo; Terukazu Tokuoka; Hyungoo Kang; Toshiko Osada; Fujio Tsumori; Hideshi Miura;
展开▼
作者单位

展开▼
年度 2012
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effect of boron addition on the rolling contact fatigue strength of Fe-Ni-Mo-B-C sintered alloys [J] . Shigeki EGASHIRA, Takashi SEKIYA, Tomoyuki ISHIMINE, Mechanical Engineering Journal . 2020,第3期

机译：硼添加对Fe-Ni-Mo-B-C烧结合金滚动接触疲劳强度的影响
2. Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening [J] . Yalong Zhang, Shengguan Qu, Feng Lu, International Journal of Fatigue . 2020,第Deca期

机译：17Cr2Ni2Movnb钢组合超声波表面轧制和喷丸轧制的微观结构和滚动疲劳行为
3. Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel [J] . Zhang Ya-Long, Lai Fu-Qiang, Qu Sheng-Guan, Surface & Coatings Technology . 2019,第期

机译：超声波表面轧制对17CR2NI2MovnB钢的微观结构和滚动疲劳行为的影响
4. (12)TOOTH BENDING AND ROLLING CONTACT FATIGUE STRENGTH OF NI-MO PRE-ALLOYED HIGH DENSITY AND SURFACE DENSIFICATION SINTERED GEAR [C] . Hironori Suzuki, Satoshi Nishida, Masaki Yoshida International Conference on Powder Metallurgy Particulate Materials . 2014

机译：（12）牙齿弯曲和滚动接触疲劳强度的Ni-Mo预合金高密度和表面致密化烧结齿轮
5. A microstructure sensitive study of rolling contact fatigue in bearing steels: A numerical and experimental approach [D] . Pandkar, Anup Surendra 2014

机译：轴承钢滚动接触疲劳的微观结构敏感性研究：数值和实验方法
6. Hot-Rolling and a Subsequent Direct-Quenching Process Enable Superior High-Cycle Fatigue Resistance in Ultra-High Strength Low Alloy Steels [O] . Min-Seok Baek, Young-Kyun Kim, Tae-Won Park, 2020

机译：热轧和随后的直接淬火过程使超高强度低合金钢中的卓越的高循环疲劳性能实现
7. Effect of Mezzo-Heterogeneous Microstructure and Rolling on the Tooth Root Bending Fatigue Properties of Sintered Ni Alloy Steel Gears [O] . Terukazu Tokuoka, Toru Yamamoto, Kentaro Kudo, 2011

机译：夹竹节 - 异质微观结构对烧结Ni合金钢齿轮齿根弯曲疲劳性能的影响

Effect of Mezzo-Heterogeneous Microstructure and Rolling on the Rolling Contact Fatigue Strength of Sintered High Ni Alloy Steels

著录项

相似文献

相关主题

期刊订阅