首页> 外文OA文献 >Prediction for Thickness and Fracture of Stainless Steel-Aluminum-Magnesium Multilayered Sheet during Warm Deep Drawing

【2h】

Prediction for Thickness and Fracture of Stainless Steel-Aluminum-Magnesium Multilayered Sheet during Warm Deep Drawing

机译：温热深拉伸期间不锈钢 - 铝 - 镁多层板厚度和断裂预测

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Y.S. Lee; K.S. Lee; D. Kim;
展开▼
作者单位

展开▼
年度 2012
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Finite element analysis of the formability of an austenitic stainless steel sheet in warm deep drawing [J] . H. Takuda, K. Mori, T. Masachika Journal of Materials Processing Technology . 2003,第0期

机译：奥氏体不锈钢板热拉伸中成形性的有限元分析
2. DEFORMATION MICROSTRUCTURES AND THE SHEAR STRAIN RATE OF TYPE 304 STAINLESS STEEL SHEET IN CYLINDRICAL DEEP DRAWING OF WARM WORKING [J] . Chang JS., Chou SS. Journal of Materials Science . 1995,第10期

机译：304深孔热作拔深变形的微观组织和304不锈钢板的剪切应变率。
3. Prediction and minimisation of sheet thickness variation during deep drawing of micro/milli parts [J] . G. Brabie, E. M. Costache, N. Nanu, International Journal of Mechanical Sciences . 2013,第Null期

机译：微型/微零件深冲过程中片材厚度变化的预测和最小化
4. FINITE ELEMENT ANALYSIS OF THE FORMABILITY OF AN AUSTENITIC STAINLESS STEEL SHEET IN WARM DEEP DRAWING [C] . H. Takuda, K. Mori, T. Masachika, International Conference on Advanced Materials Processing Technologies . 2001

机译：温度深拉奥氏体不锈钢板材成形性的有限元分析
5. Mechanics of bending, flanging, and deep drawing and a computer-aided modeling system for predictions of strain, fracture, wrinkling and springback in sheet metal forming. [D] . Wang, Chuantao. 1993

机译：弯曲，翻边和深冲的力学原理以及计算机辅助建模系统，用于预测钣金成形中的应变，断裂，起皱和回弹。
6. Analysis of Deep Drawing Process for Stainless Steel Micro-Channel Array [O] . Tsung-Chia Chen, Jiang-Cheng Lin, Rong-Mao Lee 2017

机译：不锈钢微通道阵列的深冲工艺分析
7. INFLUENCE OF PROCESS PARAMETERS ON LIMITING DRAWING RATIO OF IS513 CR3 GRADE STEEL SHEET DURING WARM DEEP DRAWING [O] . 2016

机译：工艺参数对Is513 CR3级钢板在热轧过程中限制拉拔比的影响
8. Investigation of Mechanism of Failure of High-Strength Materials. Part II. The Effect of Thickness and Tempering Temperature on Fracture Appearance Transition Temperature and Critical Fracture Toughness of High Strength Sheet Steel [R] . Maynor, H. W., Blair, R. E. 1963

机译：高强度材料失效机理研究。第二部分。厚度和回火温度对高强度钢板断裂外观转变温度和临界断裂韧性的影响

Prediction for Thickness and Fracture of Stainless Steel-Aluminum-Magnesium Multilayered Sheet during Warm Deep Drawing

著录项

引文网络

相似文献

相关主题

期刊订阅