首页> 外文OA文献 >Introduction of a new term: Ferrite Number Density (FND) to measure the ferrite number of welds on thin 300 series stainless steel sheets

【2h】

Introduction of a new term: Ferrite Number Density (FND) to measure the ferrite number of welds on thin 300 series stainless steel sheets

机译：引入新的术语：铁氧体数密度（FND）测量薄300系列不锈钢板上的铁氧体数量

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
R. Kshirsagar; S. Jones; J. Lawrence; J. Tabor;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Measurement of ferrite content of stainless steel sheet welds using a new Ferrite Density Number scale [J] . Kshirsagar Rohit, Jones Steve, Lawrence Jonathan, Journal of Materials Processing Technology . 2019,第期

机译：使用新的铁氧体密度标度测量不锈钢板焊缝的铁氧体含量
2. Ferrite Determination in Stainless Steel Welds - Advances since 1974 - Developments over the last 20 years have extended Ferrite Number determinations to duplex ferritic-austenitic stainless steel weld metals [J] . D. J. KOTECKI Welding Research Council Bulletin . 2007,第519期

机译：不锈钢焊缝中铁素体的确定-1974年以来的发展-过去20年的发展将铁素体号的确定范围扩展到了双相铁素体-奥氏体不锈钢焊缝金属
3. Solidification and transformation behaviour of austenitic stainless steel weld metals solidified as primary ferrite: study of solidification and subsequent transformation of Cr-Ni stainless steel weld metals (2nd report) [J] . H. Inoue, T. Koseki, S. Okita, Welding Research Abroad . 1998,第3期

机译：固化为原始铁素体的奥氏体不锈钢焊缝金属的凝固和相变行为：Cr-Ni不锈钢焊缝金属的凝固和相变的研究（第二次报告）
4. Effect of Mechanical Working and Post-Weld Heat Treatment on the "Ferrite" Indication of Austenitic Stainless Steel Weld Overlays [C] . P.A. Maniar, R.N. Patel, M.N. Patel, International Conference on Global Trends in Joining, Cutting and Surfacing Technology . 2012

机译：机械加工和焊接后热处理对奥氏体不锈钢焊接覆盖物“铁氧体”指示的影响
5. Laser welding of ultrathin stainless steel 316L sheets. [D] . Du, Jihua. 2000

机译：激光焊接超薄316L不锈钢薄板。
6. Evaluation of the thermal aging of δ-ferrite in austenitic stainless steel welds by electrochemical analysis [O] . Gokul Obulan Subramanian, Byeong Seo Kong, Ho Jung Lee, -1

机译：电化学分析法评估奥氏体不锈钢焊缝中δ-铁素体的热时效
7. The influence of shielded metal arc welding (SMAW) inter-pass temperature on the ferrite number of weld joints made on AISI 304H stainless steel [O] . Ngonyoza Ntsikelelo 2015

机译：屏蔽金属电弧焊（SMAW）层间温度对AISI 304H不锈钢制成的焊接接头的铁素体数量的影响
8. Ferrite Morphology and Variations in Ferrite Content in Austenitic Stainless Steel Welds. [R] . David, S. A., Hanzelka, S. E., Haltom, C. P. 1981

机译：奥氏体不锈钢焊缝中铁素体形态及铁素体含量的变化。

Introduction of a new term: Ferrite Number Density (FND) to measure the ferrite number of welds on thin 300 series stainless steel sheets

著录项

引文网络

相似文献

相关主题

期刊订阅