首页> 外文OA文献 >Hydro-Dynamic Lubrication Characteristics of Floating-Bush Bearing Used for Turbocharger. 1st Report, Approximate Analysis of Hydro-static Pressure and Oil Flow Due to High Pressurized Oil Supply.

【2h】

Hydro-Dynamic Lubrication Characteristics of Floating-Bush Bearing Used for Turbocharger. 1st Report, Approximate Analysis of Hydro-static Pressure and Oil Flow Due to High Pressurized Oil Supply.

机译：涡轮增压器浮衬轴承的液压润滑特性。第一报告，电压静压压力和油流量的近似分析由于高压油供应。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
相似文献
相关主题

著录项

作者
Mizuho INAGAKI; Nariaki HORINOUCHI; Takayuki AOYAMA; Nobuyuki MORI;
展开▼
作者单位

展开▼
年度 1999
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Friction characteristics of Grease-Lubricated cylindrical roller thrust bearings (Part 2): characteristics at running time, bearing load (influence of flow property, oil viscosity) [J] . Tetsuzo Hatazawa, Jujiro Kagami, Takahisa Kawaguchi, Japanese Journal of Tribology . 1998,第10期

机译：润滑脂圆柱滚子推力轴承的摩擦特性（第2部分）：运行时的特性，轴承载荷（流动特性的影响，油的粘度）
2. Friction characteristics of Grease-Lubricated cylindrical roller thrust bearings (Part 2): characteristics at running time, bearing load (influence of flow property, oil viscosity) [J] . Tetsuzo Hatazawa, Jujiro Kagami, Takahisa Kawaguchi, Japanese Journal of Tribology . 1998,第10期

机译：润滑脂圆柱滚子推力轴承的摩擦特性（第2部分）：运行时的特性，轴承载荷（流动特性的影响，油的粘度）
3. Stability of oil-lubricated externally pressurized two-layered porous journal bearings: a non-linear transient analysis [J] . N. Saha, B. C. Majumdar Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology . 2003,第j3期

机译：油润滑外压两层多孔轴颈轴承的稳定性：非线性瞬态分析
4. A Study on the Mechanism of Lubricating Oil Consumption of Diesel Engines - 1st Report: The Effect of the Design of Piston Skirt on Lubricating Oil Consumption [C] . Akemi Ito, Haruhisa Shirakawa, Masaaki Nakamura, SAE Fuels and Lubricants Meeting and Exhibition . 2006

机译：柴油发动机润滑油消耗机理研究 - 第1次报告：活塞裙设计对润滑油消耗的影响
5. Analysis of side end pressurized bump type gas foil bearings: A model anchored to test data. [D] . Kim, Tae Ho. 2007

机译：侧端加压凸点型气箔轴承的分析：锚定于测试数据的模型。
6. Determination of Zinc-Based Additives in Lubricating Oils by Flow-Injection Analysis with Flame-AAS Detection Exploiting Injection with a Computer-Controlled Syringe [O] . Gustavo Pignalosa, Moisés Knochen, Noel Cabrera 2005

机译：流动注射-火焰原子吸收光谱法-计算机控制注射器进爆-进样分析法测定润滑油中锌基添加剂
7. Traction Characteristics of Lubricating Oil under High Pressure : 1st Report, Traction Coefficients at Mean Pressures up to 2.7 GPa [O] . Akira ISHIBASHI, Shigeru HOYASHITA, Keizi SONODA 1985

机译：高压下润滑油的牵引特性：第1次报告，平均压力牵引系数高达2.7GPa
8. An Experimental Study of High-Speed Rotors Supported by Air-Lubricated Foil Bearings— PartⅠ: Rotation in Pressurized and Self-Acting Foil Bearings [R] . L. LICHT 1969

机译：空气润滑铝箔轴承支承高速转子的试验研究 - 第一部分：加压和自动铝箔轴承的旋转

Hydro-Dynamic Lubrication Characteristics of Floating-Bush Bearing Used for Turbocharger. 1st Report, Approximate Analysis of Hydro-static Pressure and Oil Flow Due to High Pressurized Oil Supply.

著录项

相似文献

相关主题

期刊订阅