首页> 外文OA文献 >Critical temperature for grain refining of primary Si in hyper-eutectic Al-Si alloy with phosphorus addition.
【2h】

Critical temperature for grain refining of primary Si in hyper-eutectic Al-Si alloy with phosphorus addition.

机译:基于磷加成的高共晶Al-Si合金晶粒精制临界温度。

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The relation between the casting temperature and the size of primary silicon particles of hyper-eutectic Al–Si alloys was studied to understand the behavior of phosphorus in the melt, when phosphorus is added, primary silicon particles are refined as long as the casting temperature exceeds the temperature "T", defined as "the critical temperature for grain refinement" T is expressed as T(K) = 23 × Si(mass%) + 630. However, they are coarsened as the casting temperature decreases in the temperature ranges between T and liquidus. when phosphorus is added, the grains are not refined and are not affected by the casting temperature. Temperature T is considered as the temperature at which AlP compounds begin to grow and agglomerate, and it is a useful index for determinin the casting temperature.
机译:研究了超共晶Al-Si合金的初级硅颗粒的铸造温度和尺寸之间的关系,以了解熔体中磷中的行为,当添加磷时,初级硅颗粒长时间精制,只要铸造温度超过温度“T”定义为“晶粒细化的临界温度”T表示为T(k)= 23×Si(质量%)+ 630.然而,随着铸造温度在温度范围内的铸造温度降低,它们均匀化t和patermus。当添加磷时,晶粒未精制并且不受铸造温度的影响。温度T被认为是ALP化合物开始生长和凝聚的温度,并且它是确定铸造温度的有用指标。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号