首页> 外文OA文献 >Study of Welding Toughness Characteristics on the Root-pass Welding Process of High Tensile Steel at Tower Production for Offshore Wind Power Generation

【2h】

Study of Welding Toughness Characteristics on the Root-pass Welding Process of High Tensile Steel at Tower Production for Offshore Wind Power Generation

机译：海上风发电塔生产高拉伸钢根焊工艺焊接韧性特性研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Sung-Myoung Jung; Ill-Soo Kim; Ji-Sun Kim; Hyun-Ho Na; Ji-Hye Lee;
展开▼
作者单位

展开▼
年度 2012
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Micro hardness and fracture resistance in HAZ of 150 mm weld joint of microalloyed steels VL E36 and VL E420 for offshore wind towers [J] . Eugene Goli-Oglu, Zibrandt Greisen Stahl und Eisen . 2019,第2期

机译：微合金钢VL E36和VL E420的150 mm焊接接头的HAZ中的微硬度和断裂性，用于海上风塔
2. Submerged arc welding of steels for offshore wind towers [J] . Rolf Paschold, Dirk Dirksen Svetsaren . 2005,第1期

机译：海上风电塔用钢的埋弧焊
3. Economical joining of tubular steel towers for wind turbines employing non-vacuum electron beam welding for high-strength steels in comparison with submerged arc welding [J] . T. Hassel, R. Konya, M. Collmann Rivista Italiana della Saldatura . 2014,第3期

机译：与埋弧焊相比，采用非真空电子束焊接技术对高强度钢进行风力涡轮机管状钢塔的经济连接
4. Study on Process stability and seam characteristics of High Power Laser welding with filling wire for High thickness steel [C] . Cai Yan, Li Guohua, Huang Jian, Lasers in Material Processing and Manufacturing III . 2008

机译：高厚钢填充线大功率激光焊接的工艺稳定性和焊缝特性研究。
5. Experimental Investigation of the Local Buckling and Fatigue Behavior of Slender and Tapered Spirally Welded Steel Tubes to Enable Taller Wind Towers. [D] . Jay, Angelina Louise. 2017

机译：细长的锥形螺旋焊接钢管的局部屈曲和疲劳行为的实验研究，以使塔架更高。
6. Effects of Conventional Welding and Laser Welding on the Tensile Strength Ultimate Tensile Strength and Surface Characteristics of Two Cobalt–Chromium Alloys: A Comparative Study [O] . Seenivasan Madhan Kumar, Jayesh Raghavendra Sethumadhava, Vaidyanathan Anand Kumar, 2012

机译：常规焊接和激光焊接对两种钴铬合金的拉伸强度极限拉伸强度和表面特性的影响：比较研究
7. A Study on Characteristic of Residual Stresses in a wind Tower Using the Tandem Circumferential Welding Process [O] . Ji Sun Kim, In Ju Kim 2012

机译：使用串联圆周焊接工艺研究风塔中残余应力的特性
8. Weldability Tests of High Tensile Steel (Elimination of Cracking Tendency in Welding Navy High Tensile Steel) BUSHIPS Welding Test No. 325. Partial report [R] . Jackson, C. E. 1944

机译：高强度钢（开裂趋势的消除在焊接海军高强度钢）BUsHIps焊接试验第325部分报告的焊接性试验

Study of Welding Toughness Characteristics on the Root-pass Welding Process of High Tensile Steel at Tower Production for Offshore Wind Power Generation

著录项

引文网络

相似文献

相关主题

期刊订阅