首页> 外文OA文献 >High-Performance Face Milling of 42CrMo4 Steel: Influence of Entering Angle on the Measured Surface Roughness, Cutting Force and Vibration Amplitude

【2h】

High-Performance Face Milling of 42CrMo4 Steel: Influence of Entering Angle on the Measured Surface Roughness, Cutting Force and Vibration Amplitude

机译：42Crmo4钢的高性能面研磨：进入角度对测量表面粗糙度，切割力和振动幅度的影响

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Marcin Płodzień; Łukasz Żyłka; Paweł Sułkowicz; Krzysztof Żak; Szymon Wojciechowski;
展开▼
作者单位

展开▼
年度 2021
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. The influence of cutting forces on surface roughness in the milling of curved hardened steel surfaces [J] . Kull Neto Henrique, Diniz Anselmo Eduardo, Pederiva Robson The International Journal of Advanced Manufacturing Technology . 2016,第5a8期

机译：弯曲硬化钢表面铣削中切削力对表面粗糙度的影响
2. Analysis of Surface Roughness and Cutting Forces in Hard Turning of 42CrMo4 Steel using Taguchi and RSM Method [J] . Mustafa ?ZDEM?R, Mehmet Tuncay KAYA, Hamza Kemal AKYILDIZ Mechanika . 2020,第3期

机译：使用Taguchi和RSM方法分析42crmO4钢硬盘的表面粗糙度和切割力
3. Effect of Variable Pitch on Cutting Temperature, Cutting Forces and Surface Roughness Using Nitico30 Cutting Tool when End Milling of Stainless Steel 316L [J] . Afiff Latif, Mohd Rasidi Ibrahim, Mohammad Sukri Mustapa, Materials science forum . 2017,第期

机译：Nitico30切削工具在316L不锈钢端铣削时可变螺距对切削温度，切削力和表面粗糙度的影响
4. Influence of the Honed Cutting Edge on Tool Wear and Surface Integrity in Slot Milling of 42CrMo4 Steel [C] . Berend Denkena, Jens Koehler, Michael Rehe CIRP Conference on High Performance Cutting . 2012

机译：珩磨切削刃对42crmo4钢槽铣刀工具磨损和表面完整性的影响
5. Single point incremental forming of aluminum sheet metal: The development of maximum forming angle forming limits, measured strains, surface roughness and dimensional accuracy. [D] . Ham, Marnie Elizabeth Jean. 2007

机译：铝钣金件的单点增量成形：最大成形角成形极限，测得的应变，表面粗糙度和尺寸精度的发展。
6. Optimization of Cutting Data and Tool Inclination Angles During Hard Milling with CBN Tools Based on Force Predictions and Surface Roughness Measurements [O] . Andrzej Matras, Wojciech Zębala 2020

机译：基于力预测和表面粗糙度测量的CBN刀具硬铣削过程中的切削数据和刀具倾斜角的优化
7. Influence of the Honed Cutting Edge on Tool Wear and Surface Integrity in Slot Milling of 42CrMo4 Steel [O] . Denkena Berend, Koehler Jens, Rehe Michael 2012

机译：珩磨刃口对42CrMo4钢槽铣中刀具磨损和表面完整性的影响

High-Performance Face Milling of 42CrMo4 Steel: Influence of Entering Angle on the Measured Surface Roughness, Cutting Force and Vibration Amplitude

著录项

引文网络

相似文献

相关主题

期刊订阅