首页> 外文OA文献 >Texture and Deformation Behaviour through Thickness Direction in Strip-cast 4.5wt Si Steel Sheet.

【2h】

Texture and Deformation Behaviour through Thickness Direction in Strip-cast 4.5wt Si Steel Sheet.

机译：通过条带4.5wt％Si钢板厚度方向的纹理和变形行为。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Jae Young Park; Kyu Hwan Oh; Hyung Yong Ra;
展开▼
作者单位

展开▼
年度 2000
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Influence of cold rolling direction on texture, inhibitor and magnetic properties in strip-cast grain-oriented 3% silicon steel [J] . F. Fang, X. Lu, Y.X. Zhang, Journal of magnetism and magnetic materials . 2017,第feba期

机译：冷轧方向对带状晶粒取向3％硅钢组织，缓蚀剂和磁性能的影响
2. Deformation behavior and micro structure/texture evolution of an annealed 304 AISI stainless steel sheet. Experimental and micromechanical modeling [J] . Petit B, Gey N, Cherkaoui M, International Journal of Plasticity . 2007,第26期

机译：304 AISI退火不锈钢板的变形行为和微观结构/组织演变。实验和微机械建模
3. Simulation of Inhomogeneous Texture through the Thickness Direction during Hot Rolling Deformation in Strip Cast Al-5wt percent Mg Alloy [J] . Young-Sik Song, Byoung-Jin Kim, Hyoung-Wook Kim Journal of Korean Institute of Metal and Materials . 2008,第3期

机译：Al-5wt％Mg合金带钢热轧变形过程中沿厚度方向的不均匀组织模拟
4. Effects of Rolling Temperature on Through-thickness Deformation and Recrystallization Textures in Heavily Rolled Silicon Steel [C] . HP. Yang, F. Zhang, Y.H. Sha International Conference on Chemical, Material and Metallurgical Engineering . 2013

机译：轧制温度对大轧硅钢贯穿型贯通变形和再结晶纹理的影响
5. Torsion textures produced by deformation and by dynamic recrystallization in alpha-iron and two IF steels. [D] . Baczynski, Jerzy. 1996

机译：变形和动态重结晶在α-铁和两种IF钢中产生的扭曲纹理。
6. Modeling the Effect of Primary and Secondary Twinning on Texture Evolution during Severe Plastic Deformation of a Twinning-Induced Plasticity Steel [O] . Laszlo S. Toth, Christian Haase, Robert Allen, 2018

机译：对孪生诱导塑性钢在严重塑性变形过程中一次和二次孪生对织构演变的影响进行建模
7. Electron Microscopic Observation on the Formation of Cube Recrystallization Texture in a Copper Sheet. (Report 4. On the Deformation and Recrystallization Textures of Face Centred Cubic Metals) [O] . Shigeo Horiuchi, Tadatsune Okubo, Isao Gokyu 1965

机译：电子显微镜观察铜板立方体重结晶纹理的形成。（报告4.面向脸部中心立方金属的变形和再结晶纹理）
8. Influence of Stress on the Principal Polarisation Directions of Ultrasonic Shear Waves in Textured Steel Plates [R] . Sayers, C. M., Allen, D. R. 1983

机译：应力对织构钢板超声波剪切波主偏振方向的影响

Texture and Deformation Behaviour through Thickness Direction in Strip-cast 4.5wt Si Steel Sheet.

著录项

引文网络

相似文献

相关主题

期刊订阅