首页> 外文OA文献 >Numerical Modeling of Deflected Columnar Dendritic Grains Solidified in a Flowing Melt and Its Experimental Verification.

【2h】

Numerical Modeling of Deflected Columnar Dendritic Grains Solidified in a Flowing Melt and Its Experimental Verification.

机译：流动熔体固化的偏转柱状树枝状晶粒的数值模拟及其实验验证。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
S. Y. Lee; S. M. Lee; C. P. Hong;
展开▼
作者单位

展开▼
年度 2000
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Numerical Modeling of Deflected Columnar Dendritic Grains Solidified in a Flowing Melt and Its Experimental Verification [J] . S.Y. LEE, S.M. LEE, C.P. HONG ISIJ international . 2000,第1期

机译：流动熔体中凝固的柱状枝晶晶粒的数值模拟及其实验验证
2. Numerical modeling of columnar grain deflection of Al-Cu alloys solidified in a flowing melt on an inclined Cu Substrate [J] . Sung-Yoon Lee, Sang-Mok Lee Journal of Korean Institute of Metal and Materials . 1999,第5期

机译：倾斜Cu基底上流动熔体中凝固的Al-Cu合金柱形偏斜的数值模拟
3. Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation - Part II: Illustrative modelling results and parameter studies [J] . Wu M., Ludwig A., Fjeld A. Computational Materials Science . 2010,第1期

机译：熔体对流和颗粒沉降的混合柱状均质凝固建模-第二部分：示例性建模结果和参数研究
4. Modeling of Deflected Columnar Grains Solidified In Flowing Melt [C] . S.Y.Lee, S.M.Lee, C.P.Hong Proceedings of the Eighth International Conference on Modeling of Casting and Welding Processes held in San Diego, California on June 7-12, 1998. . 1998

机译：流动熔体中凝固的偏析柱状晶粒的建模
5. Modeling Dendritic Solidification under Melt Convection Using Lattice Boltzmann and Cellular Automaton Methods [D] . Dorari, Elaheh. 2019

机译：用格子玻璃和蜂窝自动机方法建模熔体对流下的树突凝固
6. Application of Inner Radiation Baffles in the Bridgman Process for Flattening the Temperature Profile and Controlling the Columnar Grain Structure of Directionally Solidified Ni-Based Superalloys [O] . Dariusz Szeliga, Waldemar Ziaja, Maciej Motyka, 2019

机译：内辐射挡板在Bridgman工艺中用于扁平化温度分布和控制定向凝固Ni基高温合金柱状晶粒结构的应用
7. Numerical Analysis of Columnar Grains Growing in Melt Convection by Phase Field Model [O] . Sukeharu Nomoto, Teruo Izumi, Yuh Shiohara, 2001

机译：相场模型熔融对流中生长柱状粒度的数值分析
8. Computer Modelling of Particle Limited Grain Growth and Its Experimental Verification. [R] . Doherty, R. D., Li, K., Kashyup, K., 1989

机译：颗粒有限晶粒长大的计算机模拟及其实验验证。

Numerical Modeling of Deflected Columnar Dendritic Grains Solidified in a Flowing Melt and Its Experimental Verification.

著录项

引文网络

相似文献

相关主题

期刊订阅