首页> 外文OA文献 >Electric Resistance Soldering to Fabricate Wrought Wire Clasps-Influence of Heating Duration on Deformation and Mechanical Properties of Clasp Arms and Tensile Strength of Soldered Parts.

【2h】

Electric Resistance Soldering to Fabricate Wrought Wire Clasps-Influence of Heating Duration on Deformation and Mechanical Properties of Clasp Arms and Tensile Strength of Soldered Parts.

机译：电阻焊接制造锻造的钢丝扣除加热持续时间对钩环臂变形和力学性能的影响和焊接部件的拉伸强度。

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Masahito Kibi; Takahiro Ono; Kazunori Ikebe; Sakae Yasui; Takashi Nokubi; Yoshiaki Taga;
展开▼
作者单位

展开▼
年度 1994
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Relationship of Mechanical and Micromechanical Properties with Microstructural Evolution of Sn-3.0Ag-0.5Cu (SAC305) Solder Wire Under Varied Tensile Strain Rates and Temperatures [J] . Abdullah Izhan, Zulkifli Muhammad Nubli, Jalar Azman, Journal of Electronic Materials . 2019,第5期

机译：不同拉伸应变率和温度下SN-3.0AG-0.5CU（SAC305）焊丝微观结构演化的机械和微机械性能的关系及温度
2. The Effect of Bi/Sn Ratio of Bi-Sn-Ag Solder on the Mechanical and Electrical Properties of Interfaces Between Solder/Thermoelectric Material and Solder/Electrode [J] . Cho Jun-Young, Ahn Seunghyun, Bae Sung-Hwan, Journal of Nanoelectronics and Optoelectronics . 2015,第4期

机译：Bi-Sn-Ag焊料的Bi / Sn比对焊料/热电材料与焊料/电极之间的界面的机械和电气性能的影响
3. Deformation behavior relationship between tensile and nanoindentation tests of SAC305 lead-free solder wire [J] . Abdullah Izhan, Zulkifli Muhammad Nubli, Jalar Azman, Soldering & Surface Mount Technology . 2018,第3期

机译：SAC305无铅焊点拉伸和纳米狭窄试验之间的变形行为关系
4. Microstructure and mechanical properties of resistor chip joints fabricated by laser soldering using Sn-58Bi solder on Ni(P)/Cu pads [C] . Shuang Tian, Ruihua Cao, Jian Zhou, International Conference on Electronic Packaging Technology . 2017

机译：使用SN-58BI焊料在Ni（P）/ Cu垫上激光焊接电阻芯片接头的微观结构和力学性能
5. Mechanical properties characterization of lead-free solder bumps and ultra-low-k dielectrics by nanoindentation [D] . Du, Yingjie 2015

机译：通过纳米压痕表征无铅焊料凸块和超低k电介质的机械性能
6. Improved electrical and thermo-mechanical properties of a MWCNT/In–Sn–Bi composite solder reflowing on a flexible PET substrate [O] . Sang Hoon Kim, Min-soo Park, Joon-Phil Choi, -1

机译：改进了在柔性PET基板上回流的MWCNT / In-Sn-Bi复合焊料的电和热机械性能
7. Evaluation of Soldering Procedure in Fabrication of Wrought Wire Clasp. Differences in Temporary Attachment and Soldering. [O] . Kazunori Ikebe, Takashi Nokubi, Masahito Kibi, 1992

机译：钢丝扣制造中焊接程序的评价。临时附着和焊接的差异。

Electric Resistance Soldering to Fabricate Wrought Wire Clasps-Influence of Heating Duration on Deformation and Mechanical Properties of Clasp Arms and Tensile Strength of Soldered Parts.

著录项

引文网络

相似文献

相关主题

期刊订阅