首页> 外文OA文献 >ELASTIC-PLASTIC ULTIMATE STRENGTH OF GABLE TYPED RIGID FRAMES WITH H SHAPED STEEL SECTIONS : (Part IV) Ultimate strength against asymmetrically distributed vertical loads

【2h】

ELASTIC-PLASTIC ULTIMATE STRENGTH OF GABLE TYPED RIGID FRAMES WITH H SHAPED STEEL SECTIONS : (Part IV) Ultimate strength against asymmetrically distributed vertical loads

机译：具有H形钢部分的山墙类型刚性框架的弹性塑料极限强度：（第四部分）抗对称分布垂直载荷的极限强度

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
KAZUTAKA ABE; KENGO TAGAWA; MASAMI SAKAI;
展开▼
作者单位

展开▼
年度 1983
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. A Potential Strength and Ultimate Behavior of Framed Structures Considering Catenary Effects after Failure Mechanism Formation Subjected to Vertical Load [J] . Takumi ITO, Tatsuya FUKUYAMA Theoretical and Applied Mechanics Japan . 2011,第2期

机译：考虑竖向荷载作用下失效机理形成后的链条效应的框架结构的潜在强度和极限行为
2. Evolution of stress-resultant loading and ultimate strength surfaces in cyclic plasticity of steel wide-flange cross-sections [J] . Jerome F. Hajjar Journal of Constructional Steel Research . 2003,第6期

机译：钢宽法兰截面的循环塑性中应力载荷和极限强度表面的演变
3. Cyclic loading behavior of Steel Chevron Frames and Bracing Connections Part 11 Ultimate Strength of Chevron CBF with Yielding Beam [J] . Akiri Seki, Shuhei Uesugi, Taichiro Okazaki, 日本建築学会大会学術講演梗概集 . 2019,第2019期

机译：钢雪钉框架的循环加载行为及支撑连接的第11部分CBF CBF与屈服梁的终极强度
4. Discussion on some problems in ultimate bending strength verification of rigid beam-column connections in earthquake-resistant steel frames [C] . Chen Jiong Baosteel Biennial Academic Conference . 2008

机译：抗震钢框架中刚性梁柱连接极限抗弯强度验证中若干问题的讨论
5. Evaluation of ultimate strength of low-rise steel building frames and components using wind tunnel data. [D] . Jang, Seokkwon. 2003

机译：利用风洞数据评估低层钢结构框架和构件的极限强度。
6. High-Tensile Strength Tapes Show Greater Ultimate Failure Load and Less Stiffness Than High-Tensile Strength Sutures in a Subpectoral Biceps Tenodesis Porcine Model [O] . Chih-Kai Hong, Wei-Ren Su, Fa-Chuan Kuan, 2020

机译：高抗拉强度磁带显示出更大的最终故障负载和比在副卵戊二头肌植物猪模型中的高抗拉强度缝合线的较高刚度
7. ELASTIC-PLASTIC ULTIMATE STRENGTH OF GABLE TYPED RIGID FRAMES WITH H-SHAPED STEEL SECTIONS : (Part II) Ultimate vertical strength analysis considering the deterioration of bending stiffness caused by yield regions [O] . KAZUTAKA ABE, KENGO TAGAWA, MASAMI SAKAI 1982

机译：具有H形钢部分的山形类型刚性框架的弹性塑料极限强度：（II部分）考虑屈服区弯曲刚度劣化的终极垂直强度分析
8. Effect of Two Strength Reducing Techniques on the Ultimate Tensile Strength of AISI 4130 Steel: Rocket Motor Case Venting [R] . Wright, M. S., Kubin, R. F. 1984

机译：两种强度降低技术对aIsI 4130钢最终抗拉强度的影响：火箭发动机壳体通风

ELASTIC-PLASTIC ULTIMATE STRENGTH OF GABLE TYPED RIGID FRAMES WITH H SHAPED STEEL SECTIONS : (Part IV) Ultimate strength against asymmetrically distributed vertical loads

著录项

引文网络

相似文献

相关主题

期刊订阅