首页> 外文OA文献 >On the Magnitude of the Sprayed Drops : The Study on the Atomization of Liquid by Means of High Pressure and High Speed Liquid Jet 2 nd Report

【2h】

On the Magnitude of the Sprayed Drops : The Study on the Atomization of Liquid by Means of High Pressure and High Speed Liquid Jet 2 nd Report

机译：喷涂液滴的大小：通过高压和高速液喷射2 ND报告研究液体雾化

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Yasusi TANASAWA; Syoitiro TOYODA;
展开▼
作者单位

展开▼
年度 1949
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Characteristics of disintegration of a liquid fuel jet across a high-temperature and high-speed airstream (1st report, spray shape obtained by ejecting the liquid fuel) [J] . Tetsuya Oda, Hiroyuki Hiroyasu, Takashi Sasaki 日本機械学会論文集. B編 . 1997,第615期

机译：液体燃料射流在高温和高速气流中的崩解特性（第一报告，通过喷射液体燃料获得的喷雾形状）
2. Spray and mixing characteristics of liquid jet in a tubular gas-liquid atomization mixer [J] . Lingzhen Kong, Jiaqing Chen, Tian Lan, 中国化学工程学报（英文版） . 2021,第006期

机译：Spray and mixing characteristics of liquid jet in a tubular gas-liquid atomization mixer
3. High Speed Imaging of Drop Formation From Low Viscosity Liquids and Polymer Melts in Spinning Disk Atomization [J] . Yoshinori Senuma, Jons G. Hilborn Polymer engineering and science . 2002,第5期

机译：旋转盘雾化中低粘度液体和聚合物熔体形成液滴的高速成像
4. Simulation of liquid jet atomization for fuel sprays by means of a cascade drop breakup model [C] . F. X. Tanner, G. Weisser SAE International Congress and Exposition . 1999

机译：通过级联滴压模型仿真燃料喷雾液喷射雾化
5. Studies on the mixing of liquid jets and pre-atomized sprays in confined swirling air flows for lean direct injection combustion. [D] . Huh, Jun-Young. 1998

机译：研究液体射流和预雾化喷雾在有限的旋流中的混合，以实现稀薄的直接喷射燃烧。
6. Ultrasonic atomization of liquids in drop-chain acoustic fountains [O] . Julianna C. Simon, Oleg A. Sapozhnikov, Vera A. Khokhlova, -1

机译：滴链声喷泉中液体的超声雾化
7. Characteristics of Liquid Jet Atomization Across a High-Speed Airstream. 1st Report. Experiment on Shape of Spray, Spatial Distribution of Injected Liquid and Sauter Mean Diameter. [O] . Tetsuya ODA, Hiroyuki HIROYASU, Masataka ARAI, 1992

机译：高速气流液喷射雾化特征。第一个报告。喷涂形状的试验，喷射液体的空间分布和燃烧叶片平均直径。
8. Maximum drop diameters for the atomization of liquid jets injected concurrently into accelerating or decelerating gas streams [R] . Ingebo, R. D. 1968

机译：同时注入加速或减速气流的液体射流雾化的最大液滴直径

On the Magnitude of the Sprayed Drops : The Study on the Atomization of Liquid by Means of High Pressure and High Speed Liquid Jet 2 nd Report

著录项

引文网络

相似文献

相关主题

期刊订阅