首页> 外文OA文献 >On the Tool Wear in the Intermittent Cutting of the Reinforced Plastics : 1st Report, Wear Behavior in Dry Cutting

【2h】

On the Tool Wear in the Intermittent Cutting of the Reinforced Plastics : 1st Report, Wear Behavior in Dry Cutting

机译：在增强塑料的间歇切割中的工具磨损：第1次报告，干切割磨损行为

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Masasuke TUEDA; Yosio HASEGAWA; Sinsaku HANASAKI;
展开▼
作者单位

展开▼
年度 1968
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Development of novel tool for cutting of carbon-fiber-reinforced plastics (Positive use of abrasive wear at tool edge for reduction in cutting force) [J] . Satoru MAEGAWA, Shinya HAYAKAWA, Fumihiro ITOIGAWA, Mechanical Engineering Journal . 2015,第6期

机译：研发出用于切割碳纤维增强塑料的新型工具（积极利用工具边缘的磨料磨损以降低切割力）
2. Detection of Tool Wear Using Characteristic Values of Dynamic Cutting Process (1st Report, Study of Characteristic Values to Detect Flank Wear) [J] . Eiji KONDO, Norio KAWAGOISHI, Hiroaki OKUMA 日本機械学会論文集. C編 . 1999,第630期

机译：利用动态切削过程的特征值检测刀具磨损（第一份报告，研究检测侧面磨损的特征值）
3. Friction and wear behaviors of the carbide tools embedded with solid lubricants in sliding wear tests and in dry cutting processes [J] . Deng Jianxin, Song Wenlong, Zhang Hui, Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 2011,第9a10期

机译：嵌入有固体润滑剂的硬质合金刀具在滑动磨损测试和干切削过程中的摩擦磨损特性
4. Control of Tool Wear in Single Crystal Diamond Cutting of Steel by Intermittent Cutting Method [C] . Youngchan Song, Kentaro Nezu, Toshiro Shibasaka, International Conference of the European Society for Precision Engineering and Nanotechnology vol.2 . 2005

机译：间歇切削法在钢单晶金刚石切削中的刀具磨损控制
5. Tool life and flank wear modeling of physical vapour deposited titanium aluminum nitride/titanium nitride multilayer coated carbide inserts when end milling 4340 steel under dry and semi-dry cutting conditions [D] . Chakraborty, Pinaki 2007

机译：在干式和半干式切削条件下端铣4340钢时，物理气相沉积的氮化钛铝/氮化钛多层涂层硬质合金刀片的刀具寿命和侧面磨损模型
6. Effect of the Adaptive Response on the Wear Behavior of PVD and CVD Coated Cutting Tools during Machining with Built Up Edge Formation [O] . German Fox-Rabinovich, Iosif S. Gershman, Kenji Yamamoto, 2020

机译：建立边缘地层加工过程中PVD和CVD涂层切削刀具磨损行为的影响
7. On the Tool Wear in the Intermittent Cutting of the Reinforced Plastics : 3rd Report, Effect of Cutting Fluid on the Tool Wear [O] . Yosio HASEGAWA, Sinsaku HANASAKI, Hidehiko KITA, 1968

机译：在增强塑料的间歇切割中的工具磨损：第3次报告，切削液对工具磨损的影响

On the Tool Wear in the Intermittent Cutting of the Reinforced Plastics : 1st Report, Wear Behavior in Dry Cutting

著录项

引文网络

相似文献

相关主题

期刊订阅