首页> 外文OA文献 >Fatigue Strength under Combined Rotating Bending and Torsional Load : Report 4, Fatigue Behavior in V-Notched Circular Specimen of 0.45 Carbon Steel

【2h】

Fatigue Strength under Combined Rotating Bending and Torsional Load : Report 4, Fatigue Behavior in V-Notched Circular Specimen of 0.45 Carbon Steel

机译：旋转弯曲和扭转载荷组合的疲劳强度：报告4，V-缺口圆形试样的疲劳行为为0.45％碳钢

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Saneyasu HOSHI; Hiroshi NAKAMURA; Yoshikata KOBAYASHI;
展开▼
作者单位

展开▼
年度 1975
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Fatigue crack growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending load [J] . Selvakumar VEERARAJAN, Dakshinamurthy PUKAZHENDHI, Palla GANDHI 结构与土木工程前沿：英文版 . 2021,第004期

机译：疲劳裂纹增长行为170毫米直径不锈钢直管，经受组合扭转和弯曲载荷
2. Effect of Different Loads on Fatigue Strength of 1040 Steel Materials After Design and Manufacturing of Rotating-Bending Fatigue Test Device [J] . Hakan G?KME?E, Onur G?K American Journal of Engineering Research . 2020,第11期

机译：不同载荷对1040钢材疲劳强度的设计与制造旋转弯曲疲劳试验装置
3. Comparison of Fatigue Criteria for Combined Bending-Torsion Loading of Nitrided and Virgin Specimens [J] . S. Major, J. Papuga, J. Hornikova, Проблемы прочностиПроблемы прочности: на рус．укр．и анг．языках . 2008,第1期

机译：氮化试样和原始试样的组合弯曲扭转载荷的疲劳准则比较
4. EFFECTS OF ROTATING - BENDING AND TORSIONAL FATIGUE LOADS ON GAS TUNGSTEN ARC (GTA) WELDED AISI 1018 LOW CARBON STEEL JOINTS [C] . M.W. Dewan, Gustavo Gonzalez, M.A. Wahab ASME international manufacturing science and engineering conference . 2015

机译：旋转-弯曲和扭转疲劳载荷对焊接钨极氩弧焊AISI 1018低碳钢接头的影响
5. Studies on Rotating-Bending Fatigue Behavior of Surface Engineered Low-Alloy Steel Shaft Materials [D] . Puntambekar, U. N. 2014

机译：表面工程低合金钢轴材料的弯曲弯曲疲劳行为研究
6. Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime [O] . Yongtao Hu, Yao Chen, Chao He, 2020

机译：316L不锈钢弯曲行为直至非常高的循环疲劳制度
7. Fatigue Strength under Combined Rotating Bending and Torsional Load : Report 1 Fatigue Life of V-notched S 35 C Steel Specimen under Successive Rotating Bending and Reversed Torsion [O] . Hiroshi NAKAMURA, Saneyasu HOSHI, Itsuro AOKI 1969

机译：组合旋转弯曲和扭转载荷下的疲劳强度：在连续旋转弯曲和逆转扭转下报告V-indched S 35 C钢样品的疲劳寿命
8. FATIGUE STRENGTHS OF AIRCRAFT MATERIALS AXIAL-LOAD FATIGUE TESTS ON EDGE-NOTCHED SHEET SPECIMENS OF 2024-T3 AND 7075-T6 ALUMINUM ALLOYS AND OF SAE 4130 STEEL WITH NOTCH RADⅡOF 0.004 AND 0.070 INCH [R] . H. J. Grover, W. S. Hyler, L. R. Jackson 1959

机译：2024-T3和7075-T6铝合金边缘板材以及saE 4130钢的轴向负荷疲劳试验的疲劳强度，缺口尺寸为0.004和0.070英寸

Fatigue Strength under Combined Rotating Bending and Torsional Load : Report 4, Fatigue Behavior in V-Notched Circular Specimen of 0.45 Carbon Steel

著录项

引文网络

相似文献

相关主题

期刊订阅